[yocto] "bitbake core-image-sato" yields "No package 'gdk-x11-3.0' found" build failure

[Burton, Ross]

x11 is in the default DISTRO_FEATURES for poky, so you don't need to add that.

If core-image-x11 works then core-image-sato should build fine.  Try
deleting your tmp/ and trying again, if that doesn't work then
pastebin both temp/log.do_configure and config.log from the recipe
that is failing (matchbox-panel).

Ross
On Mon, 29 Oct 2018 at 13:21, Joe Flowers <joe.flowers at nofreewill.com> wrote:
>
> Thanks, Ross.
>
> 1.
> Both of these commands worked:
>
> MACHINE=wandboard bitbake core-image-x11
> MACHINE=wandboard bitbake gtk+3
>
> 2.
> I've attached my local.conf.
>
> If the attachment does not go through, then I will copy and paste it into my next message.
>
> Thanks!
>
> Joe
> -------------------------------
>
>
> On Mon, Oct 29, 2018 at 7:54 AM Burton, Ross <ross.burton at intel.com> wrote:
>>
>> Can you share your local.conf?  Does bitbake gtk+3 work?
>>
>> Ross
>> On Mon, 29 Oct 2018 at 06:42, Joe Flowers <joe.flowers at nofreewill.com> wrote:
>> >
>> > Hello everyone,
>> >
>> > 1.
>> > I am trying to build a core-image-sato image for a WandBoard but am getting stuck at this error message:
>> >
>> > "| No package 'gdk-x11-3.0' found"
>> >
>> > See below for more details.
>> >
>> >
>> > 2.
>> > I have grepped this list's archives and run into someone with the same problem, but a solution was never included in the thread.
>> >
>> > https://lists.yoctoproject.org/pipermail/yocto/2017-December/039149.html
>> >
>> >
>> > Help please.
>> >
>> > Joe
>> >
>> > ------------------------------
>> >
>> > Command
>> >
>> > MACHINE=wandboard bitbake core-image-sato
>> >
>> > produces this error message:
>> >
>> > ...
>> > ...
>> > | checking for pkg-config... /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/recipe-sysroot-native/usr/bin/pkg-config
>> > | configure: WARNING: using cross tools not prefixed with host triplet
>> > | checking pkg-config is at least version 0.9.0... yes
>> > | checking for glib-2.0
>> > |                   gmodule-export-2.0
>> > |                   x11
>> > |                   gdk-x11-3.0
>> > |                   gtk+-3.0... no
>> > | configure: error: Package requirements (glib-2.0
>> > |                   gmodule-export-2.0
>> > |                   x11
>> > |                   gdk-x11-3.0
>> > |                   gtk+-3.0) were not met:
>> > |
>> > | No package 'gdk-x11-3.0' found
>> > |
>> > | Consider adjusting the PKG_CONFIG_PATH environment variable if you
>> > | installed software in a non-standard prefix.
>> > |
>> > | Alternatively, you may set the environment variables MATCHBOX_PANEL_CFLAGS
>> > | and MATCHBOX_PANEL_LIBS to avoid the need to call pkg-config.
>> > | See the pkg-config man page for more details.
>> > | NOTE: The following config.log files may provide further information.
>> > | NOTE: /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/build/config.log
>> > | ERROR: configure failed
>> > | WARNING: exit code 1 from a shell command.
>> > | ERROR: Function failed: do_configure (log file is located at /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/temp/log.do_configure.40754)
>> > ERROR: Task (/opt/yocto/sources/poky/meta/recipes-sato/matchbox-panel-2/matchbox-panel-2_2.11.bb:do_configure) failed with exit code '1'
>> > NOTE: Tasks Summary: Attempted 3024 tasks of which 2828 didn't need to be rerun and 1 failed.
>> >
>> > Summary: 1 task failed:
>> >   /opt/yocto/sources/poky/meta/recipes-sato/matchbox-panel-2/matchbox-panel-2_2.11.bb:do_configure
>> > Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>> > joe at ubuntu:/opt/yocto/build$
>> >
>> > ------------------------------
>> >
>> > --
>> > _______________________________________________
>> > yocto mailing list
>> > yocto at yoctoproject.org
>> > https://lists.yoctoproject.org/listinfo/yocto