[yocto] "bitbake core-image-sato" yields "No package 'gdk-x11-3.0' found" build failure

[Joe Flowers]

HI Ross,

It still doesn't work.


local.conf
https://pastebin.com/2Ng0wSCi


log.do_configure.27655
https://pastebin.com/4EX9vqmK


config.log
https://pastebin.com/DY2FnM7w


Thanks for trying to help me.

Joe
----------------


On Mon, Oct 29, 2018 at 11:43 AM Burton, Ross <ross.burton at intel.com> wrote:

> x11 is in the default DISTRO_FEATURES for poky, so you don't need to add
> that.
>
> If core-image-x11 works then core-image-sato should build fine.  Try
> deleting your tmp/ and trying again, if that doesn't work then
> pastebin both temp/log.do_configure and config.log from the recipe
> that is failing (matchbox-panel).
>
> Ross
> On Mon, 29 Oct 2018 at 13:21, Joe Flowers <joe.flowers at nofreewill.com>
> wrote:
> >
> > Thanks, Ross.
> >
> > 1.
> > Both of these commands worked:
> >
> > MACHINE=wandboard bitbake core-image-x11
> > MACHINE=wandboard bitbake gtk+3
> >
> > 2.
> > I've attached my local.conf.
> >
> > If the attachment does not go through, then I will copy and paste it
> into my next message.
> >
> > Thanks!
> >
> > Joe
> > -------------------------------
> >
> >
> > On Mon, Oct 29, 2018 at 7:54 AM Burton, Ross <ross.burton at intel.com>
> wrote:
> >>
> >> Can you share your local.conf?  Does bitbake gtk+3 work?
> >>
> >> Ross
> >> On Mon, 29 Oct 2018 at 06:42, Joe Flowers <joe.flowers at nofreewill.com>
> wrote:
> >> >
> >> > Hello everyone,
> >> >
> >> > 1.
> >> > I am trying to build a core-image-sato image for a WandBoard but am
> getting stuck at this error message:
> >> >
> >> > "| No package 'gdk-x11-3.0' found"
> >> >
> >> > See below for more details.
> >> >
> >> >
> >> > 2.
> >> > I have grepped this list's archives and run into someone with the
> same problem, but a solution was never included in the thread.
> >> >
> >> >
> https://lists.yoctoproject.org/pipermail/yocto/2017-December/039149.html
> >> >
> >> >
> >> > Help please.
> >> >
> >> > Joe
> >> >
> >> > ------------------------------
> >> >
> >> > Command
> >> >
> >> > MACHINE=wandboard bitbake core-image-sato
> >> >
> >> > produces this error message:
> >> >
> >> > ...
> >> > ...
> >> > | checking for pkg-config...
> /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/recipe-sysroot-native/usr/bin/pkg-config
> >> > | configure: WARNING: using cross tools not prefixed with host triplet
> >> > | checking pkg-config is at least version 0.9.0... yes
> >> > | checking for glib-2.0
> >> > |                   gmodule-export-2.0
> >> > |                   x11
> >> > |                   gdk-x11-3.0
> >> > |                   gtk+-3.0... no
> >> > | configure: error: Package requirements (glib-2.0
> >> > |                   gmodule-export-2.0
> >> > |                   x11
> >> > |                   gdk-x11-3.0
> >> > |                   gtk+-3.0) were not met:
> >> > |
> >> > | No package 'gdk-x11-3.0' found
> >> > |
> >> > | Consider adjusting the PKG_CONFIG_PATH environment variable if you
> >> > | installed software in a non-standard prefix.
> >> > |
> >> > | Alternatively, you may set the environment variables
> MATCHBOX_PANEL_CFLAGS
> >> > | and MATCHBOX_PANEL_LIBS to avoid the need to call pkg-config.
> >> > | See the pkg-config man page for more details.
> >> > | NOTE: The following config.log files may provide further
> information.
> >> > | NOTE:
> /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/build/config.log
> >> > | ERROR: configure failed
> >> > | WARNING: exit code 1 from a shell command.
> >> > | ERROR: Function failed: do_configure (log file is located at
> /opt/yocto/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/matchbox-panel-2/2.11-r0/temp/log.do_configure.40754)
> >> > ERROR: Task
> (/opt/yocto/sources/poky/meta/recipes-sato/matchbox-panel-2/matchbox-panel-2_2.11.bb:do_configure)
> failed with exit code '1'
> >> > NOTE: Tasks Summary: Attempted 3024 tasks of which 2828 didn't need
> to be rerun and 1 failed.
> >> >
> >> > Summary: 1 task failed:
> >> >
>  /opt/yocto/sources/poky/meta/recipes-sato/matchbox-panel-2/matchbox-panel-2_2.11.bb:
> do_configure
> >> > Summary: There were 2 ERROR messages shown, returning a non-zero exit
> code.
> >> > joe at ubuntu:/opt/yocto/build$
> >> >
> >> > ------------------------------
> >> >
> >> > --
> >> > _______________________________________________
> >> > yocto mailing list
> >> > yocto at yoctoproject.org
> >> > https://lists.yoctoproject.org/listinfo/yocto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20181029/2b0fb1b3/attachment-0001.html>