[yocto] Yocto on Atmel SAME70?

[Khem Raj]

On Thu, Nov 22, 2018 at 2:26 PM Gerson Fernando Budke <nandojve at gmail.com>
wrote:

> I believe YOCTO currently don't support MMU less like SAME70 MCU.
> If someone have YOCTO with MMU less I'm very interested :D
>

That’s right although OE at one point did support nommu and that has not
been deleted but is not maintained either

>
> GFB
>
> Em qui, 22 de nov de 2018 às 04:46, Khem Raj <raj.khem at gmail.com>
> escreveu:
>
>> atmel boards are supported through meta-atmel BSP layer
>>
>> see
>>
>> https://github.com/linux4sam/meta-atmel
>>
>> sample images
>> https://github.com/linux4sam/meta-atmel/tree/sumo/recipes-atmel/images
>> On Wed, Nov 21, 2018 at 8:30 PM rz charger <rzcharger at gmail.com> wrote:
>> >
>> > Hi everyone,
>> >
>> > Good day.
>> >
>> > Currently our team is using Yocto on CM3 Raspberry Pi. We are planning
>> to port our current Yocto project into Atmel SAME70. However we are not
>> sure whether it is possible or not. We have few questions hopefully someone
>> has some experience with this can enlighten us.
>> >
>> > 1. Is it possible and recommended to implement Yocto into Atmel SAME70
>> for IoT application? (Single core CPU:300MHz, RAM: 384KB, Program Memory
>> Size: 2048 KB)
>> > 2. Any example/past project of Yocto running on Atmel SAME70?
>> >
>> >  Appreciate your time.Thank you
>> >
>> > Regards,
>> > Rz Charger
>> > Malaysia
>> > --
>> > _______________________________________________
>> > yocto mailing list
>> > yocto at yoctoproject.org
>> > https://lists.yoctoproject.org/listinfo/yocto
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20181123/e2727b40/attachment.html>