[yocto] Yocto on Atmel SAME70?

[Gerson Fernando Budke]

I believe YOCTO currently don't support MMU less like SAME70 MCU.
If someone have YOCTO with MMU less I'm very interested :D

GFB

Em qui, 22 de nov de 2018 às 04:46, Khem Raj <raj.khem at gmail.com> escreveu:

> atmel boards are supported through meta-atmel BSP layer
>
> see
>
> https://github.com/linux4sam/meta-atmel
>
> sample images
> https://github.com/linux4sam/meta-atmel/tree/sumo/recipes-atmel/images
> On Wed, Nov 21, 2018 at 8:30 PM rz charger <rzcharger at gmail.com> wrote:
> >
> > Hi everyone,
> >
> > Good day.
> >
> > Currently our team is using Yocto on CM3 Raspberry Pi. We are planning
> to port our current Yocto project into Atmel SAME70. However we are not
> sure whether it is possible or not. We have few questions hopefully someone
> has some experience with this can enlighten us.
> >
> > 1. Is it possible and recommended to implement Yocto into Atmel SAME70
> for IoT application? (Single core CPU:300MHz, RAM: 384KB, Program Memory
> Size: 2048 KB)
> > 2. Any example/past project of Yocto running on Atmel SAME70?
> >
> >  Appreciate your time.Thank you
> >
> > Regards,
> > Rz Charger
> > Malaysia
> > --
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20181122/04a7f8d5/attachment.html>