[yocto] [meta-raspberrypi] enable serial communication pi 3
yahia farghaly
yahiafarghaly at gmail.com
Tue Sep 12 05:09:21 PDT 2017
I have bitbaked rpi-hwup-image for raspberry pi 3 on sd card and connected
the serial ports to *usb to ttl device* . i have set the minicom to
port: /dev/ttyUSB0
baud rate: 115200
the image is booting fine and i can see the prompt on the screen but cannot
see in my serial console using minicom.
*is serial enabled by default for this image ? *
i also tried ENABLE_UART = "1" in local.conf but doesn't help.
how to enable it ? and what the serial device name with respect to
raspberry pi
thanks,
--
Yahia Farghaly
Graduated from Faculty of Engineering - Electronics and Communications
Department at Cairo University.
Linkedin <https://linkedin.com/in/yahiafarghaly> - GitHub
<https://github.com/yahiafarghaly>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20170912/855911cc/attachment.html>
More information about the yocto
mailing list