[yocto] [meta-raspberrypi] enable serial communication pi 3

[yahia farghaly]

:(



‌

On 12 September 2017 at 14:09, yahia farghaly <yahiafarghaly at gmail.com>
wrote:

> I have bitbaked rpi-hwup-image for raspberry pi 3 on sd card and connected
> the serial ports to *usb to ttl device* . i have set the minicom to
> port: /dev/ttyUSB0
> baud rate: 115200
> the image is booting fine and i can see the prompt on the screen but
> cannot see in my serial console using minicom.
> *is serial enabled by default for this image ? *
> i also tried ENABLE_UART = "1" in local.conf but doesn't help.
>
> how to enable it ? and what the serial device name with respect to
> raspberry pi
>
> thanks,
>
> --
> Yahia Farghaly
> Graduated from Faculty of Engineering - Electronics and Communications
> Department at Cairo University.
> Linkedin <https://linkedin.com/in/yahiafarghaly> - GitHub
> <https://github.com/yahiafarghaly>
>
>
>
> ‌
>



-- 
Yahia Farghaly
Graduated from Faculty of Engineering - Electronics and Communications
Department at Cairo University.
Linkedin <https://linkedin.com/in/yahiafarghaly> - GitHub
<https://github.com/yahiafarghaly>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20170912/3c00e842/attachment.html>