[yocto] [meta-raspberrypi][Question] How to build an hwup image for raspberrypi3

Khem Raj raj.khem at gmail.com
Thu May 19 07:17:10 PDT 2016


On Thu, May 19, 2016 at 5:15 AM, piotr.lewicki <piotr.lewicki at elfin.de> wrote:
> Hello,
> I'm trying to build a Yocto image for raspberrypi3.
> I'm using only two layers:
> - poky (krogoth: rev eff84a76acea1a0842194106a66684511f409842)
> - meta-raspberrypi (master: rev 9912d38e97671704822d1aa05312a0439cb650d3)
>
> I have built it by cloning both layers from git (and changing poky branch),
> then I sourced poky (source poky/oe-init-build-env), added meta-raspberrypi
> layer in conf/bblayers.conf and in conf/local.conf changed MACHINE to
> raspberrypi3.
>
> Then I have built "rpi-hwup-image" using bitbake and dd'd it to an SD card.
>
> Unfortunately rpi-hwup-image does not work on raspberry pi 3.
> Boot screen halts when 4 raspberry logos show up and that's it.
>
> On the other hand I have tried the same SD card with raspberry pi 2 and it
> booted up (!?).

set

ENABLE_UART = "1"

in local.conf

>
> Can you tell me if there is still support for meta-raspberrypi layer?
> I found that this layer does not follow Yocto project naming convention for
> branches (I think that the latest is "jethro", but nothing newer besides
> "master").
> Does this mean that there is no stable and up-to-date branch apart from
> master?
>
> Has anybody built a raspberrypi3 image?
> Could you tell me which layers and which branches should I use?
>
>
> Thanks,
> Piotr Lewicki
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto



More information about the yocto mailing list