[yocto] Help Cross Compiling for AVR

[Khem Raj]

> On Apr 5, 2016, at 8:18 AM, Washburn, David (washbudh) <washbudh at mail.uc.edu> wrote:
> 
> Hi All,
> 
> I am attempting to get the AVR Toolchain working inside of Yocto, but unfortunately I'm relatively new to Yocto and keep seeing various errors I cannot resolve. I was able to follow the instructions HERE <http://www.nongnu.org/avr-libc/user-manual/install_tools.html> to get everything working locally, but I'm seeing various issues inside of Yocto. I was able to get binutils configured and installed correctly but I haven't had any luck getting GCC installed. I am able to get pass the configure and compile stages in Yocto, but when I get to the install task, there's always a failure. The failure stems from this task below, which is a part of GCC:
> 
> # Add unwind.h, it comes from libgcc which we don't want to build again
> install /build-bundle/poky/build/tmp/sysroots/x86_64-linux/usr/lib/avr/gcc/avr/4.9.3/include/unwind.h
> /build-bundle/poky/build/tmp/work/cortexa53-vfp-neon-poky-linux-gnueabi/gcc-target-avr/4.9.3-r0/image/usr/lib/gcc/avr/4.9.3/include/
> 
> The reason it fails is because one of the two paths is always incorrect, no matter how I attempt to configure the build. If I configure the TARGET_SYS to be 'avr' during the install task, the path to 'unwind.h' becomes what is shown above, but the unwind header is not there. I *think* it's due to the fact that the TARGET_SYS was set to our default 'arm-poky-linux-gnueabi' during the configure stage. If I try to set the configuration to have a TARGET_SYS of 'avr' it might resolve the issue, but unfortunately doing this causes the compile stage to fail with:
>     | Makefile:1571: t-oe: No such file or directory
>     | make[1]: *** No rule to make target `t-oe'.  Stop.
> 

I think you should try with master first

> I am using a slightly modified version of the recipes shown in the link below.
>          https://lists.yoctoproject.org/pipermail/yocto/2014-December/022781.html <https://lists.yoctoproject.org/pipermail/yocto/2014-December/022781.html>
> 
> Lastly, here is a link to the GCC commit that talks about the need to copy over the file that is causing issues for me:
>          https://gcc.gnu.org/ml/gcc-patches/2003-03/msg00367.html <https://gcc.gnu.org/ml/gcc-patches/2003-03/msg00367.html>
> 
> Thanks in advance for any help you can give, and I apologize if any of this is unclear, I am still relatively new to Yocto.
> 
> Kind Regards,
>       David Washburn
> 
> 
> 
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> https://lists.yoctoproject.org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20160407/98094943/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 204 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20160407/98094943/attachment.pgp>