[yocto] New error in 1.7

[Paul Eggleton]

Hi there,

On Tuesday 25 November 2014 19:27:13 peterengcomau001 at adam.com.au wrote:
> thank you. i have fixed the curl problem but a new problem has occured
> with the build. This problem did not appear in v1.6.1. The problem is:
> 
> 	lachlan at lachlan-SVP13215PXB:~/poky/build-atmel$ bitbake
> atmel-qt5-demo-image -c populate_sdk
> 
> 	Loading cache: 100%
> 
> |###########################################################################
> |###########################################################################
> |#####|
> ETA: 00:00:00
> 
> 	Loaded 2108 entries from dependency cache.
> 
> 	NOTE: Resolving any missing task queue dependencies
> 
> 	Build Configuration:
> 
> 	BB_VERSION = "1.24.0"
> 
> 	BUILD_SYS = "x86_64-linux"
> 
> 	NATIVELSBSTRING = "Ubuntu-14.04"
> 
> 	TARGET_SYS = "arm-poky-linux-gnueabi"
> 
> 	MACHINE = "sama5d3xek"
> 
> 	DISTRO = "poky"
> 
> 	DISTRO_VERSION = "1.7"
> 
> 	TUNE_FEATURES = "arm armv7a vfp thumb callconvention-hard cortexa5"
> 
> 
> 	TARGET_FPU = "vfp"
> 
> 	meta-atmel = "my_branch:711809b0d91f816b10e70508986b3f43098000ba"
> 
> 	meta-qt5 = "my_branch:0732e184acef5e0200f46d7f95702774e5de1904"
> 
> 	meta
> 
> 	meta-yocto
> 
> 	meta-yocto-bsp = "dizzy:db7f4f31c915a59c502cac4be905d23df5246b3d"
> 
> 	meta-oe
> 
> 	meta-python
> 
> 	meta-networking
> 
> 	meta-ruby = "my_branch:9efaed99125b1c4324663d9a1b2d3319c74e7278"
> 
> 	NOTE: Preparing runqueue
> 
> 	NOTE: Executing SetScene Tasks
> 
> 	NOTE: Executing RunQueue Tasks
> 
> 	ERROR: Function failed: do_configure (log file is located at
> /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
> gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736)
> 
> 
> 	ERROR: Logfile of failure stored in:
> /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
> gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736
> 	Log data follows:
> 	| DEBUG: Executing python function sysroot_cleansstate
> 	| 
> 	| DEBUG: Python function sysroot_cleansstate finished
> 	| 
> 	| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
> 
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> 'common']
> 
> 	| DEBUG: Executing shell function autotools_preconfigure
> 	| 
> 	| DEBUG: Shell function autotools_preconfigure finished
> 	| 
> 	| DEBUG: Executing python function autotools_copy_aclocals
> 	| 
> 	| DEBUG: Python function autotools_copy_aclocals finished
> 	| 
> 	| DEBUG: Executing shell function do_configure
> 	| 
> 	| automake (GNU automake) 1.14.1
> 	| 
> 	| Copyright (C) 2013 Free Software Foundation, Inc.
> 	| 
> 	| License GPLv2+: GNU GPL version 2 or later
> 	| 
> 	| This is free software: you are free to change and redistribute it.
> 	| 
> 	| 
> 	| There is NO WARRANTY, to the extent permitted by law.
> 	| 
> 	| 
> 	| 
> 	| Written by Tom Tromey
> 	| 
> 	| and Alexandre Duret-Lutz .
> 	| 
> 	| AUTOV is 1.14
> 	| 
> 	| NOTE: Executing ACLOCAL="aclocal
> 
> --system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky
> -linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/
> --automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/u
> sr/share/aclocal-1.14" autoreconf --verbose --install --force
> --exclude=autopoint -I
> /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
> gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
> 	| autoreconf: Entering directory `'
> 	| 
> 	| autoreconf: configure.ac: not using Gettext
> 	| 
> 	| autoreconf: running: aclocal
> 
> --system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky
> -linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/
> --automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/u
> sr/share/aclocal-1.14 -I
> /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
> gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ -I
> /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
> gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ --force -I m4 -I
> common/m4
> 
> 	| autoreconf: configure.ac: tracing
> 	| 
> 	| autoreconf: running: libtoolize --copy --force
> 	| 
> 	| libtoolize: putting auxiliary files in `.'.
> 	| 
> 	| libtoolize: copying file `./ltmain.sh'
> 	| 
> 	| libtoolize: putting macros in `m4'.
> 	| 
> 	| libtoolize: copying file `m4/libtool.m4'
> 	| 
> 	| libtoolize: copying file `m4/ltoptions.m4'
> 	| 
> 	| libtoolize: copying file `m4/ltsugar.m4'
> 	| 
> 	| libtoolize: copying file `m4/ltversion.m4'
> 	| 
> 	| libtoolize: copying file `m4/lt~obsolete.m4'
> 	| 
> 	| libtoolize: Remember to add `LT_INIT' to configure.ac.
> 	| 
> 	| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to
> 
> configure.ac and
> 
> 	| libtoolize: rerunning libtoolize, to keep the correct libtool
> 
> macros in-tree
> 
> 	| autoreconf: running:
> /home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoconf
> --include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linu
> x-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ --force
> 
> 	| autoreconf: running:
> /home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoheader
> --include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linu
> x-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ --force
> 
> 	| autoreconf: running: automake --add-missing --copy --force-missing
> 	| 
> 	| 
> 	| Makefile.am: error: required file './AUTHORS' not found

This is likely a result of the --foreign option being removed - see:

  http://www.yoctoproject.org/docs/1.7/ref-manual/ref-manual.html#migration-1.7-autotools-class-changes

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre