[yocto] New error in 1.7

peterengcomau001 at adam.com.au peterengcomau001 at adam.com.au
Tue Nov 25 03:38:41 PST 2014 


	 
 the change to oprofile.inc and the associated patch appear to be
already present in the meta data.
Any other ideas what could be causing the problem?
Lachlan

----- Original Message -----
 From: "Paul Eggleton" .eggleton at linux.intel.com> 
To:
Cc:
Sent:Tue, 25 Nov 2014 10:09:47 +0000
Subject:Re: [yocto] New error in 1.7

 Hi there,

 On Tuesday 25 November 2014 19:27:13 peterengcomau001 at adam.com.au
wrote:
 > thank you. i have fixed the curl problem but a new problem has
occured
 > with the build. This problem did not appear in v1.6.1. The problem
is:
 > 
 > lachlan at lachlan-SVP13215PXB:~/poky/build-atmel$ bitbake
 > atmel-qt5-demo-image -c populate_sdk
 > 
 > Loading cache: 100%
 > 
 >
|###########################################################################
 >
|###########################################################################
 > |#####|
 > ETA: 00:00:00
 > 
 > Loaded 2108 entries from dependency cache.
 > 
 > NOTE: Resolving any missing task queue dependencies
 > 
 > Build Configuration:
 > 
 > BB_VERSION = "1.24.0"
 > 
 > BUILD_SYS = "x86_64-linux"
 > 
 > NATIVELSBSTRING = "Ubuntu-14.04"
 > 
 > TARGET_SYS = "arm-poky-linux-gnueabi"
 > 
 > MACHINE = "sama5d3xek"
 > 
 > DISTRO = "poky"
 > 
 > DISTRO_VERSION = "1.7"
 > 
 > TUNE_FEATURES = "arm armv7a vfp thumb callconvention-hard
cortexa5"
 > 
 > 
 > TARGET_FPU = "vfp"
 > 
 > meta-atmel = "my_branch:711809b0d91f816b10e70508986b3f43098000ba"
 > 
 > meta-qt5 = "my_branch:0732e184acef5e0200f46d7f95702774e5de1904"
 > 
 > meta
 > 
 > meta-yocto
 > 
 > meta-yocto-bsp = "dizzy:db7f4f31c915a59c502cac4be905d23df5246b3d"
 > 
 > meta-oe
 > 
 > meta-python
 > 
 > meta-networking
 > 
 > meta-ruby = "my_branch:9efaed99125b1c4324663d9a1b2d3319c74e7278"
 > 
 > NOTE: Preparing runqueue
 > 
 > NOTE: Executing SetScene Tasks
 > 
 > NOTE: Executing RunQueue Tasks
 > 
 > ERROR: Function failed: do_configure (log file is located at
 >
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
 > gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736)
 > 
 > 
 > ERROR: Logfile of failure stored in:
 >
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
 > gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736
 > Log data follows:
 > | DEBUG: Executing python function sysroot_cleansstate
 > | 
 > | DEBUG: Python function sysroot_cleansstate finished
 > | 
 > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
 > 
 > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
 > 'common']
 > 
 > | DEBUG: Executing shell function autotools_preconfigure
 > | 
 > | DEBUG: Shell function autotools_preconfigure finished
 > | 
 > | DEBUG: Executing python function autotools_copy_aclocals
 > | 
 > | DEBUG: Python function autotools_copy_aclocals finished
 > | 
 > | DEBUG: Executing shell function do_configure
 > | 
 > | automake (GNU automake) 1.14.1
 > | 
 > | Copyright (C) 2013 Free Software Foundation, Inc.
 > | 
 > | License GPLv2+: GNU GPL version 2 or later
 > | 
 > | This is free software: you are free to change and redistribute
it.
 > | 
 > | 
 > | There is NO WARRANTY, to the extent permitted by law.
 > | 
 > | 
 > | 
 > | Written by Tom Tromey
 > | 
 > | and Alexandre Duret-Lutz .
 > | 
 > | AUTOV is 1.14
 > | 
 > | NOTE: Executing ACLOCAL="aclocal
 > 
 >
--system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky
 >
-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/
 >
--automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/u
 > sr/share/aclocal-1.14" autoreconf --verbose --install --force
 > --exclude=autopoint -I
 >
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
 > gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
 > | autoreconf: Entering directory `'
 > | 
 > | autoreconf: configure.ac: not using Gettext
 > | 
 > | autoreconf: running: aclocal
 > 
 >
--system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky
 >
-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/
 >
--automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/u
 > sr/share/aclocal-1.14 -I
 >
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
 > gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ -I
 >
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/
 > gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/ --force
-I m4 -I
 > common/m4
 > 
 > | autoreconf: configure.ac: tracing
 > | 
 > | autoreconf: running: libtoolize --copy --force
 > | 
 > | libtoolize: putting auxiliary files in `.'.
 > | 
 > | libtoolize: copying file `./ltmain.sh'
 > | 
 > | libtoolize: putting macros in `m4'.
 > | 
 > | libtoolize: copying file `m4/libtool.m4'
 > | 
 > | libtoolize: copying file `m4/ltoptions.m4'
 > | 
 > | libtoolize: copying file `m4/ltsugar.m4'
 > | 
 > | libtoolize: copying file `m4/ltversion.m4'
 > | 
 > | libtoolize: copying file `m4/lt~obsolete.m4'
 > | 
 > | libtoolize: Remember to add `LT_INIT' to configure.ac.
 > | 
 > | libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to
 > 
 > configure.ac and
 > 
 > | libtoolize: rerunning libtoolize, to keep the correct libtool
 > 
 > macros in-tree
 > 
 > | autoreconf: running:
 >
/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoconf
 >
--include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linu
 > x-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
--force
 > 
 > | autoreconf: running:
 >
/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoheader
 >
--include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linu
 > x-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
--force
 > 
 > | autoreconf: running: automake --add-missing --copy
--force-missing
 > | 
 > | 
 > | Makefile.am: error: required file './AUTHORS' not found

 This is likely a result of the --foreign option being removed - see:


http://www.yoctoproject.org/docs/1.7/ref-manual/ref-manual.html#migration-1.7-autotools-class-changes

 Cheers,
 Paul

 -- 

 Paul Eggleton
 Intel Open Source Technology Centre
 -- 
 _______________________________________________
 yocto mailing list
 yocto at yoctoproject.org
 https://lists.yoctoproject.org/listinfo/yocto
@yoctoproject.org>@adam.com.au>---- Message sent via Adam Internet
WebMail - http://www.adam.com.au/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20141125/b007a8f8/attachment.html>

More information about the yocto mailing list