[yocto] New error in 1.7

peterengcomau001 at adam.com.au peterengcomau001 at adam.com.au
Tue Nov 25 00:57:13 PST 2014 

thank you. i have fixed the curl problem but a new problem has occured
with the build. This problem did not appear in v1.6.1. The problem is:

	lachlan at lachlan-SVP13215PXB:~/poky/build-atmel$ bitbake
atmel-qt5-demo-image -c populate_sdk  

	Loading cache: 100%
|###########################################################################################################################################################|
ETA: 00:00:00  

	Loaded 2108 entries from dependency cache.  

	NOTE: Resolving any missing task queue dependencies  

	Build Configuration:  

	BB_VERSION = "1.24.0"  

	BUILD_SYS = "x86_64-linux"  

	NATIVELSBSTRING = "Ubuntu-14.04"  

	TARGET_SYS = "arm-poky-linux-gnueabi"  

	MACHINE = "sama5d3xek"  

	DISTRO = "poky"  

	DISTRO_VERSION = "1.7"  

	TUNE_FEATURES = "arm armv7a vfp thumb callconvention-hard cortexa5" 


	TARGET_FPU = "vfp"  

	meta-atmel = "my_branch:711809b0d91f816b10e70508986b3f43098000ba"  

	meta-qt5 = "my_branch:0732e184acef5e0200f46d7f95702774e5de1904"  

	meta  

	meta-yocto  

	meta-yocto-bsp = "dizzy:db7f4f31c915a59c502cac4be905d23df5246b3d"  

	meta-oe  

	meta-python  

	meta-networking  

	meta-ruby = "my_branch:9efaed99125b1c4324663d9a1b2d3319c74e7278"  

	NOTE: Preparing runqueue  

	NOTE: Executing SetScene Tasks  

	NOTE: Executing RunQueue Tasks  

	ERROR: Function failed: do_configure (log file is located at
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736)
 

	ERROR: Logfile of failure stored in:
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736
 

	Log data follows:  

	| DEBUG: Executing python function sysroot_cleansstate  

	| DEBUG: Python function sysroot_cleansstate finished  

	| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
'common']  

	| DEBUG: Executing shell function autotools_preconfigure  

	| DEBUG: Shell function autotools_preconfigure finished  

	| DEBUG: Executing python function autotools_copy_aclocals  

	| DEBUG: Python function autotools_copy_aclocals finished  

	| DEBUG: Executing shell function do_configure  

	| automake (GNU automake) 1.14.1  

	| Copyright (C) 2013 Free Software Foundation, Inc.  

	| License GPLv2+: GNU GPL version 2 or later   

	| This is free software: you are free to change and redistribute it.
 

	| There is NO WARRANTY, to the extent permitted by law.  

	|  

	| Written by Tom Tromey   

	| and Alexandre Duret-Lutz .  

	| AUTOV is 1.14  

	| NOTE: Executing ACLOCAL="aclocal
--system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/
--automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.14"
autoreconf --verbose --install --force --exclude=autopoint -I
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
 

	| autoreconf: Entering directory `'  

	| autoreconf: configure.ac: not using Gettext  

	| autoreconf: running: aclocal
--system-acdir=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/build/aclocal-copy/
--automake-acdir=/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.14
-I
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
-I
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
--force -I m4 -I common/m4  

	| autoreconf: configure.ac: tracing  

	| autoreconf: running: libtoolize --copy --force  

	| libtoolize: putting auxiliary files in `.'.  

	| libtoolize: copying file `./ltmain.sh'  

	| libtoolize: putting macros in `m4'.  

	| libtoolize: copying file `m4/libtool.m4'  

	| libtoolize: copying file `m4/ltoptions.m4'  

	| libtoolize: copying file `m4/ltsugar.m4'  

	| libtoolize: copying file `m4/ltversion.m4'  

	| libtoolize: copying file `m4/lt~obsolete.m4'  

	| libtoolize: Remember to add `LT_INIT' to configure.ac.  

	| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to
configure.ac and  

	| libtoolize: rerunning libtoolize, to keep the correct libtool
macros in-tree  

	| autoreconf: running:
/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoconf
--include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
--force  

	| autoreconf: running:
/home/lachlan/poky/build-atmel/tmp/sysroots/x86_64-linux/usr/bin/autoheader
--include=/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/gst-hantro-g1-1.0/m4/
--force  

	| autoreconf: running: automake --add-missing --copy --force-missing
 

	| Makefile.am: error: required file './AUTHORS' not found  

	| autoreconf: automake failed with exit status: 1  

	| ERROR: autoreconf execution failed.  

	| WARNING: exit code 1 from a shell command.  

	| ERROR: Function failed: do_configure (log file is located at
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/gstreamer1.0-plugins-hantro/1.0-r1/temp/log.do_configure.5736)
 

	ERROR: Task 602
(/home/lachlan/poky/meta-atmel/recipes-multimedia/gstreamer10-plugins/gstreamer1.0-plugins-hantro_1.0.bb,
do_configure) failed with exit code '1'  

	NOTE: Tasks Summary: Attempted 3741 tasks of which 3738 didn't need
to be rerun and 1 failed.  

	Waiting for 0 running tasks to finish:  

	Summary: 1 task failed:  

	
/home/lachlan/poky/meta-atmel/recipes-multimedia/gstreamer1.0-plugins/gstreamer1.0-plugins-hantro_1.0.bb,
do_configure  

	Summary: There was 1 ERROR message shown, returning a non-zero exit
code.  

	lachlan at lachlan-SVP13215PXB:~/poky/build-atmel$   
_________________________________________
Thank you for any insight into the problem.
Lachlan

----- Original Message -----
From: "akuster808" 
To:, 
Cc:
Sent:Mon, 24 Nov 2014 19:33:24 -0800
Subject:Re: [yocto] New error in 1.7

 There was an issue with the curl package over the weekend. It was 
 corrected early this morning (PST). Do you have the changes? if not,

 please refresh your cloned source.

 regards,
 Armin

 On 11/24/2014 07:16 PM, peterengcomau001 at adam.com.au wrote:
 > I have just downloaded poky 1.7 and am rebuilding the image. I get
an
 > error that I did not when doing this in 1.6.1
 >
 > lachlan at lachlan-SVP13215PXB:~/poky/build-atmel$ bitbake
 > atmel-qt5-demo-image -c populate_sdk
 >
 > Build Configuration:
 > BB_VERSION = "1.24.0"
 > BUILD_SYS = "x86_64-linux"
 > NATIVELSBSTRING = "Ubuntu-14.04"
 > TARGET_SYS = "arm-poky-linux-gnueabi"
 > MACHINE = "sama5d3xek"
 > DISTRO = "poky"
 > DISTRO_VERSION = "1.7"
 > TUNE_FEATURES = "arm armv7a vfp thumb callconvention-hard
cortexa5"
 > TARGET_FPU = "vfp"
 > meta-atmel = "my_branch:711809b0d91f816b10e70508986b3f43098000ba"
 > meta-qt5 = "my_branch:0732e184acef5e0200f46d7f95702774e5de1904"
 > meta
 > meta-yocto
 > meta-yocto-bsp = "dizzy:9bfb78bff606700176909abaa5cf8a332292738a"
 > meta-oe
 > meta-python
 > meta-networking
 > meta-ruby = "my_branch:9efaed99125b1c4324663d9a1b2d3319c74e7278"
 >
 > NOTE: Preparing runqueue
 > NOTE: Executing SetScene Tasks
 > NOTE: Executing RunQueue Tasks
 > ERROR: Command Error: exit status: 1 Output:
 > Applying patch CVE-2014-3613.patch
 > patching file lib/cookie.c
 > patching file tests/data/test1105
 > patching file tests/data/test31
 > Hunk #1 FAILED at 49 (different line endings).
 > 1 out of 2 hunks FAILED -- rejects in file tests/data/test31
 > patching file tests/data/test8
 > Patch CVE-2014-3613.patch does not apply (enforce with -f)
 > ERROR: Function failed: patch_do_patch
 > ERROR: Logfile of failure stored in:
 >
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/curl/7.37.1-r0/temp/log.do_patch.31221
 > ERROR: Task 1666
 > (/home/lachlan/poky/meta/recipes-support/curl/curl_737.1.bb,
do_patch)
 > failed with exit code '1'
 > NOTE: Tasks Summary: Attempted 2914 tasks of which 2912 didn't
need to
 > be rerun and 1 failed.
 > Waiting for 0 running tasks to finish:
 >
 > Summary: 1 task failed:
 > /home/lachlan/poky/meta/recipes-support/curl/curl_7.37.1.bb,
do_patch
 > Summary: There were 2 ERROR messages shown, returning a non-zero
exit code.
 >
 > any thoughts as to what this probleb could be.
 > ___________________________________________________________
 >
 > I also have problems with the ADT cross compiler installer in V1.7
 > compared with 1.6.1. where it wont install the rootfs as follows:
 >
 >
#########################################################################
 > # Welcome to Yocto Application Developement Tools (ADT) Installer
 > #
 > # Host Machine: x86_64
 > # OS info: 3.13.0-39-generic
 > # Yocto ADT version to be installed:
 > # supported target architectures: x86 x86_64 arm ppc mips
 > # supported target root_fs images: minimal minimal-dev sato
sato-dev
 > sato-sdk lsb lsb-dev lsb-sdk
 >
#########################################################################
 >
 > Systemwide installation Installation will occur under
/opt/poky/1.7
 >
 >
############################################################################
 > # Your system installation configurations from adt_installer.conf
 >
############################################################################
 > # Cross toolchains: arm
 > # Install Qemu: Y
 > # Install NFS utilities: Y
 >
 >
##############################################################################
 > # Your rootfs image(s) and target sysroot selections from
adt_installer.conf
 >
##############################################################################
 > # Target architecture: arm
 > # Target machine: qemuarm
 > # Root_fs images: minimal sato-sdk
 > # Target sysroot image: sato-sdk
 > # Target sysroot loc: /home/lachlan/test-yocto/qemuarm
 >
############################################################################
 >
 > Successfully installed selected native ADT!
 > Installing target sysroot for arch: arm, rootfs type: sato-sdk,
 > location: /home/lachlan/test-yocto/qemuarm
 >
 > Target sysroot location: /home/lachlan/test-yocto/qemuarm, already
 > exists! If you continue installation, this folder will be
re-created.
 > Creating directory /home/lachlan/test-yocto/qemuarm...
 > Extracting rootfs: core-image-sato-sdk-qemuarm.tar.bz2, using
pseudo...
 > tar (child): ./download_image/core-image-sato-sdk-qemuarm.tar.bz2:
 > Cannot open: No such file or directory
 > tar (child): Error is not recoverable: exiting now
 > tar: Child returned status 2
 > tar: Error is not recoverable: exiting now
 >
 > Is there anyway to overcome this or is it best to go back to 1.6.1
 >
 > Thanks
 > Lachlab
 > ---- Message sent via Adam Internet WebMail -
http://www.adam.com.au/
 >
 >
 -- 
 _______________________________________________
 yocto mailing list
 yocto at yoctoproject.org
 https://lists.yoctoproject.org/listinfo/yocto
---- Message sent via Adam Internet WebMail - http://www.adam.com.au/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20141125/1aa13e55/attachment.html>

More information about the yocto mailing list