[yocto] New error in 1.7

[akuster808]

There was an issue with the curl package over the weekend. It was 
corrected early this morning (PST). Do you have the changes? if not, 
please refresh your cloned source.

regards,
Armin

On 11/24/2014 07:16 PM, peterengcomau001 at adam.com.au wrote:
> I have just downloaded poky 1.7 and am rebuilding the image. I get an
> error that I did not when doing this in 1.6.1
>
> lachlan at lachlan-SVP13215PXB:~/poky/build-atmel$ bitbake
> atmel-qt5-demo-image -c populate_sdk
>
> Build Configuration:
> BB_VERSION        = "1.24.0"
> BUILD_SYS         = "x86_64-linux"
> NATIVELSBSTRING   = "Ubuntu-14.04"
> TARGET_SYS        = "arm-poky-linux-gnueabi"
> MACHINE           = "sama5d3xek"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.7"
> TUNE_FEATURES     = "arm armv7a vfp thumb callconvention-hard cortexa5"
> TARGET_FPU        = "vfp"
> meta-atmel        = "my_branch:711809b0d91f816b10e70508986b3f43098000ba"
> meta-qt5          = "my_branch:0732e184acef5e0200f46d7f95702774e5de1904"
> meta
> meta-yocto
> meta-yocto-bsp    = "dizzy:9bfb78bff606700176909abaa5cf8a332292738a"
> meta-oe
> meta-python
> meta-networking
> meta-ruby         = "my_branch:9efaed99125b1c4324663d9a1b2d3319c74e7278"
>
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> ERROR: Command Error: exit status: 1  Output:
> Applying patch CVE-2014-3613.patch
> patching file lib/cookie.c
> patching file tests/data/test1105
> patching file tests/data/test31
> Hunk #1 FAILED at 49 (different line endings).
> 1 out of 2 hunks FAILED -- rejects in file tests/data/test31
> patching file tests/data/test8
> Patch CVE-2014-3613.patch does not apply (enforce with -f)
> ERROR: Function failed: patch_do_patch
> ERROR: Logfile of failure stored in:
> /home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/curl/7.37.1-r0/temp/log.do_patch.31221
> ERROR: Task 1666
> (/home/lachlan/poky/meta/recipes-support/curl/curl_7.37.1.bb, do_patch)
> failed with exit code '1'
> NOTE: Tasks Summary: Attempted 2914 tasks of which 2912 didn't need to
> be rerun and 1 failed.
> Waiting for 0 running tasks to finish:
>
> Summary: 1 task failed:
>    /home/lachlan/poky/meta/recipes-support/curl/curl_7.37.1.bb, do_patch
> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>
> any thoughts as to what this probleb could be.
> ___________________________________________________________
>
> I also have problems with the ADT cross compiler installer in V1.7
> compared with 1.6.1. where it wont install the rootfs as follows:
>
> #########################################################################
> # Welcome to Yocto Application Developement Tools (ADT) Installer
> #
> # Host Machine:                x86_64
> # OS info:                3.13.0-39-generic
> # Yocto ADT version to be installed:
> # supported target architectures:    x86 x86_64 arm ppc mips
> # supported target root_fs images:    minimal minimal-dev sato sato-dev
> sato-sdk lsb lsb-dev lsb-sdk
> #########################################################################
>
> Systemwide installation. Installation will occur under /opt/poky/1.7
>
> ############################################################################
> # Your system installation configurations from adt_installer.conf
> ############################################################################
> # Cross toolchains:        arm
> # Install Qemu:            Y
> # Install NFS utilities:    Y
>
> ##############################################################################
> # Your rootfs image(s) and target sysroot selections from adt_installer.conf
> ##############################################################################
> # Target architecture:        arm
> # Target machine:        qemuarm
> # Root_fs images:        minimal sato-sdk
> # Target sysroot image:        sato-sdk
> # Target sysroot loc:        /home/lachlan/test-yocto/qemuarm
> ############################################################################
>
> Successfully installed selected native ADT!
> Installing target sysroot for arch: arm, rootfs type: sato-sdk,
> location: /home/lachlan/test-yocto/qemuarm
>
> Target sysroot location: /home/lachlan/test-yocto/qemuarm, already
> exists! If you continue installation, this folder will be re-created.
> Creating directory /home/lachlan/test-yocto/qemuarm...
> Extracting rootfs: core-image-sato-sdk-qemuarm.tar.bz2, using pseudo...
> tar (child): ./download_image/core-image-sato-sdk-qemuarm.tar.bz2:
> Cannot open: No such file or directory
> tar (child): Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error is not recoverable: exiting now
>
> Is there anyway to overcome this or is it best to go back to 1.6.1
>
> Thanks
> Lachlab
> ---- Message sent via Adam Internet WebMail - http://www.adam.com.au/
>
>