[yocto] New error in 1.7

[peterengcomau001 at adam.com.au]

I have just downloaded poky 1.7 and am rebuilding the image. I get an
error that I did not when doing this in 1.6.1

lachlan at lachlan-SVP13215PXB:~/poky/build-atmel$ bitbake
atmel-qt5-demo-image -c populate_sdk

Build Configuration:
BB_VERSION        = "1.24.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "sama5d3xek"
DISTRO            = "poky"
DISTRO_VERSION    = "1.7"
TUNE_FEATURES     = "arm armv7a vfp thumb callconvention-hard
cortexa5"
TARGET_FPU        = "vfp"
meta-atmel        =
"my_branch:711809b0d91f816b10e70508986b3f43098000ba"
meta-qt5          =
"my_branch:0732e184acef5e0200f46d7f95702774e5de1904"
meta              
meta-yocto        
meta-yocto-bsp    =
"dizzy:9bfb78bff606700176909abaa5cf8a332292738a"
meta-oe           
meta-python       
meta-networking   
meta-ruby         =
"my_branch:9efaed99125b1c4324663d9a1b2d3319c74e7278"

NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Command Error: exit status: 1  Output:
Applying patch CVE-2014-3613.patch
patching file lib/cookie.c
patching file tests/data/test1105
patching file tests/data/test31
Hunk #1 FAILED at 49 (different line endings).
1 out of 2 hunks FAILED -- rejects in file tests/data/test31
patching file tests/data/test8
Patch CVE-2014-3613.patch does not apply (enforce with -f)
ERROR: Function failed: patch_do_patch
ERROR: Logfile of failure stored in:
/home/lachlan/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/curl/7.37.1-r0/temp/log.do_patch.31221
ERROR: Task 1666
(/home/lachlan/poky/meta/recipes-support/curl/curl_7.37.1.bb,
do_patch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2914 tasks of which 2912 didn't need
to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
  /home/lachlan/poky/meta/recipes-support/curl/curl_7.37.1.bb,
do_patch
Summary: There were 2 ERROR messages shown, returning a non-zero exit
code.

any thoughts as to what this probleb could be.
___________________________________________________________

I also have problems with the ADT cross compiler installer in V1.7
compared with 1.6.1. where it wont install the rootfs as follows:

#########################################################################
# Welcome to Yocto Application Developement Tools (ADT) Installer
#
# Host Machine:                x86_64
# OS info:                3.13.0-39-generic
# Yocto ADT version to be installed:    
# supported target architectures:    x86 x86_64 arm ppc mips
# supported target root_fs images:    minimal minimal-dev sato
sato-dev sato-sdk lsb lsb-dev lsb-sdk
#########################################################################

Systemwide installation. Installation will occur under /opt/poky/1.7

############################################################################
# Your system installation configurations from adt_installer.conf
############################################################################
# Cross toolchains:        arm
# Install Qemu:            Y
# Install NFS utilities:    Y

##############################################################################
# Your rootfs image(s) and target sysroot selections from
adt_installer.conf
##############################################################################
# Target architecture:        arm
# Target machine:        qemuarm
# Root_fs images:        minimal sato-sdk
# Target sysroot image:        sato-sdk
# Target sysroot loc:        /home/lachlan/test-yocto/qemuarm
############################################################################

Successfully installed selected native ADT!
Installing target sysroot for arch: arm, rootfs type: sato-sdk,
location: /home/lachlan/test-yocto/qemuarm

Target sysroot location: /home/lachlan/test-yocto/qemuarm, already
exists! If you continue installation, this folder will be re-created.
Creating directory /home/lachlan/test-yocto/qemuarm...
Extracting rootfs: core-image-sato-sdk-qemuarm.tar.bz2, using
pseudo...
tar (child): ./download_image/core-image-sato-sdk-qemuarm.tar.bz2:
Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

Is there anyway to overcome this or is it best to go back to 1.6.1

Thanks
Lachlab
---- Message sent via Adam Internet WebMail - http://www.adam.com.au/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20141125/aa9dbe0c/attachment.html>