[yocto] build error
Alex J Lennon
ajlennon at dynamicdevices.co.uk
Wed Jun 18 15:14:13 PDT 2014
On 18/06/2014 09:38, Ruud den Bekker wrote:
>
> L.S.,
>
>
>
> I followed the directions on
> http://www.codeproject.com/Articles/774826/Adding-rd-party-components-to-Yocto-OpenEmbedded-L
>
> to add an example project to my yocto-poky build tree.
>
>
>
> a strange thing happens:
>
> when using bitbake bbexample-lt for "qemuarm" or "edgerouter", it
> builds ok.
>
> however,if I select "beaglebone" for "MACHINE", I get a configure
> error in my log file:
>
>
>
> "configure:3024: checking for C compiler version
>
> configure:3033: arm-poky-linux-gnueabi-gcc -march=armv7-a
> -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8
> --sysroot=/home/ruud/poky-daisy-11.0.0/build/tmp/sysroots/beaglebone
> --version >&5
>
> /home/ruud/poky-daisy-11.0.0/build/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/bbexample-lt/1.0-r0/bbexample-1.0/configure:
> line 3035: arm-poky-linux-gnueabi-gcc: command not found"
>
>
>
> However, the building e.g. a "core-image-minimal" or my added
> "core-image-mono" for a "beaglebone" builds fine and I can use the RFS
> on a "real" hardware board.
>
>
>
Hi Ruud,
I checked this through for the Beaglebone and it builds OK.
- git cloned meta-ti
- setup a new build tree
- MACHINE ??= 'beaglebone' in local.conf
- Added meta-example layer to bblayers.conf
$ bitbake bbexample
...
BB_VERSION = "1.23.1"
BUILD_SYS = "i686-linux"
NATIVELSBSTRING = "Ubuntu-12.04"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "beaglebone"
DISTRO = "poky"
DISTRO_VERSION = "1.6+snapshot-20140618"
TUNE_FEATURES = "arm armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "master:b5a928af721026795be7b7f68b2dd577408afbe5"
meta-oe = "master:8316933b400ae6fda688637fcc3e202b38a8e12b"
meta-ti = "master:f351978d956e199032db5302696587969f5c428e"
meta-example = "master:5ee4f20b041bc886b1d2d913ac11814057317634"
Given you're having other issues too, it might be worth you trying a
simple build in a clean tree?
Regards,
Alex
> What can be the cause of this?
>
>
>
> Best regards,
>
>
>
> Ruud
>
>
>
> Ruud den Bekker
>
> Cordis Automation B.V.
>
> High Tech Campus 9
>
> 5656 AE Eindhoven
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20140618/c944fc73/attachment.html>
More information about the yocto
mailing list