[yocto] build error

[Ruud den Bekker]

L.S.,

 

I followed the directions on
http://www.codeproject.com/Articles/774826/Adding-rd-party-components-to
-Yocto-OpenEmbedded-L

to add an example project to my yocto-poky build tree.

 

a strange thing happens:

when using bitbake bbexample-lt  for "qemuarm" or "edgerouter", it
builds ok.

however,if I select "beaglebone" for "MACHINE", I get a configure error
in my log file:

 

"configure:3024: checking for C compiler version

configure:3033: arm-poky-linux-gnueabi-gcc  -march=armv7-a
-mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8
--sysroot=/home/ruud/poky-daisy-11.0.0/build/tmp/sysroots/beaglebone
--version >&5

/home/ruud/poky-daisy-11.0.0/build/tmp/work/cortexa8hf-vfp-neon-poky-lin
ux-gnueabi/bbexample-lt/1.0-r0/bbexample-1.0/configure: line 3035:
arm-poky-linux-gnueabi-gcc: command not found"

 

However, the building e.g. a "core-image-minimal" or my added
"core-image-mono" for a "beaglebone" builds fine and I can use the RFS
on a "real" hardware board.

 

What can be the cause of this?

 

Best regards,

 

Ruud

 

Ruud den Bekker

Cordis Automation B.V.

High Tech Campus 9

5656 AE Eindhoven

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20140618/91178f50/attachment.html>