[yocto] Avionic Tamonten Board - Uboot problem
Gary Thomas
gary at mlbassoc.com
Tue Feb 19 10:36:42 PST 2013
On 2013-02-19 09:02, Satya Swaroop Damarla wrote:
> Unfortunately "tec_config" didnot work. Here is the error message
I think you need a newer U-Boot to get the support for this board.
Try
PREFERRED_VERSION_u-boot ?= "v2012.10%"
or even
PREFERRED_VERSION_u-boot ?= "v2013.01%"
> Log data follows:
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 8 CROSS_COMPILE=arm-poky-linux-gnueabi- CC=arm-poky-linux-gnueabi-gcc --sysroot=/home/build/yocto/poky/buildTamonten/tmp/sysroots/skidata-tamonten tec_config
> | make: *** No rule to make target `tec_config'. Stop.
> | make: *** [tec_config] Error 1
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compile (see
> /home/build/yocto/poky/buildTamonten/tmp/work/skidata_tamonten-poky-linux-gnueabi/u-boot-v2012.04.01+git3+415d386877df49eb051b85ef74fa59a16dc17c7d-r2/temp/log.do_compile.21665 for
> further information)
> ERROR: Task 69 (/home/build/yocto/poky/meta/recipes-bsp/u-boot/u-boot_2012.04.01.bb <http://u-boot_2012.04.01.bb>, do_compile) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 3421 tasks of which 319 didn't need to be rerun and 1 failed.
>
>
>
>
> On Tue, Feb 19, 2013 at 3:58 PM, Gary Thomas <gary at mlbassoc.com <mailto:gary at mlbassoc.com>> wrote:
>
> On 2013-02-19 06:28, Satya Swaroop Damarla wrote:
>
> Hi,
>
> I want to build a basic image for the Avionic Tamonten board using Yocto. SO, I created a skidata-tamonten.conf in the list of machines based on the beagleboard.conf but I dont
> know what to add for the UBOOT_MACHINE= . I tried my best to use the same "omap_beagle_conf" but it doesnot boot properly. Here is the skidata-tamonten.conf file description
>
>
> Try 'tec_config'
>
> #@TYPE: Machine
> #@NAME: skidata-tamonten machine
> #@DESCRIPTION: Machine configuration for the Tamonten board
>
> PREFERRED_PROVIDER_virtual/__xserver ?= "xserver-xorg"
> XSERVER ?= "xserver-xorg \
> xf86-input-evdev \
> xf86-input-mouse \
> xf86-video-omapfb \
> xf86-input-keyboard"
>
> # Ship all kernel modules by default
> MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
>
> # Allow for MMC booting ()
> EXTRA_IMAGEDEPENDS += "u-boot"
>
> # Uncomment the following line to enable the hard floating point abi. Note that
> # this breaks some binary libraries and 3D (neither of which ship with
> # meta-yocto). For maximum compatibility, leave this disabled.
> DEFAULTTUNE ?= "cortexa9thf"
> include conf/machine/include/tune-__cortexa9.inc
>
> IMAGE_FSTYPES += "tar.bz2 ext2 ext3"
>
> SERIAL_CONSOLE = "115200 ttyO2"
>
> PREFERRED_PROVIDER_virtual/__kernel ?= "linux-yocto"
> PREFERRED_VERSION_linux-yocto ?= "3.2%"
>
> KERNEL_IMAGETYPE = "uImage"
>
> PREFERRED_VERSION_u-boot ?= "v2012.04%"
>
> UBOOT_MACHINE = "???????????????????"
>
> UBOOT_ENTRYPOINT = "0x00008000"
> UBOOT_LOADADDRESS = "0x00008000"
>
> MACHINE_FEATURES = "usbgadget usbhost vfat alsa screen touchscreen keyboard"
>
>
> Greetings & Regards,
> Swaroop
>
>
>
> _________________________________________________
> yocto mailing list
> yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> https://lists.yoctoproject.__org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto>
>
>
> --
> ------------------------------__------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------__------------------------------
> _________________________________________________
> yocto mailing list
> yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> https://lists.yoctoproject.__org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto>
>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the yocto
mailing list