[yocto] Avionic Tamonten Board - Uboot problem

[Satya Swaroop Damarla]

Unfortunately "tec_config" didnot work. Here is the error message

Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8 CROSS_COMPILE=arm-poky-linux-gnueabi-
CC=arm-poky-linux-gnueabi-gcc
 --sysroot=/home/build/yocto/poky/buildTamonten/tmp/sysroots/skidata-tamonten
tec_config
| make: *** No rule to make target `tec_config'.  Stop.
| make: *** [tec_config] Error 1
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see
/home/build/yocto/poky/buildTamonten/tmp/work/skidata_tamonten-poky-linux-gnueabi/u-boot-v2012.04.01+git3+415d386877df49eb051b85ef74fa59a16dc17c7d-r2/temp/log.do_compile.21665
for further information)
ERROR: Task 69 (/home/build/yocto/poky/meta/recipes-bsp/u-boot/
u-boot_2012.04.01.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3421 tasks of which 319 didn't need to be
rerun and 1 failed.




On Tue, Feb 19, 2013 at 3:58 PM, Gary Thomas <gary at mlbassoc.com> wrote:

> On 2013-02-19 06:28, Satya Swaroop Damarla wrote:
>
>> Hi,
>>
>> I want to build a basic image for the Avionic Tamonten board using Yocto.
>> SO, I created a skidata-tamonten.conf in the list of machines based on the
>> beagleboard.conf but I dont
>> know what to add for the UBOOT_MACHINE= . I tried my best to use the same
>> "omap_beagle_conf" but it doesnot boot properly. Here is the
>> skidata-tamonten.conf file description
>>
>>
> Try 'tec_config'
>
>  #@TYPE: Machine
>> #@NAME: skidata-tamonten machine
>> #@DESCRIPTION: Machine configuration for the Tamonten board
>>
>> PREFERRED_PROVIDER_virtual/**xserver ?= "xserver-xorg"
>> XSERVER ?= "xserver-xorg \
>>             xf86-input-evdev \
>>             xf86-input-mouse \
>>             xf86-video-omapfb \
>>             xf86-input-keyboard"
>>
>> # Ship all kernel modules by default
>> MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
>>
>> # Allow for MMC booting ()
>> EXTRA_IMAGEDEPENDS += "u-boot"
>>
>> # Uncomment the following line to enable the hard floating point abi.
>> Note that
>> # this breaks some binary libraries and 3D (neither of which ship with
>> # meta-yocto). For maximum compatibility, leave this disabled.
>> DEFAULTTUNE ?= "cortexa9thf"
>> include conf/machine/include/tune-**cortexa9.inc
>>
>> IMAGE_FSTYPES += "tar.bz2 ext2 ext3"
>>
>> SERIAL_CONSOLE = "115200 ttyO2"
>>
>> PREFERRED_PROVIDER_virtual/**kernel ?= "linux-yocto"
>> PREFERRED_VERSION_linux-yocto ?= "3.2%"
>>
>> KERNEL_IMAGETYPE = "uImage"
>>
>> PREFERRED_VERSION_u-boot ?= "v2012.04%"
>>
>> UBOOT_MACHINE = "???????????????????"
>>
>> UBOOT_ENTRYPOINT = "0x00008000"
>> UBOOT_LOADADDRESS = "0x00008000"
>>
>> MACHINE_FEATURES = "usbgadget usbhost vfat alsa screen touchscreen
>> keyboard"
>>
>>
>> Greetings & Regards,
>> Swaroop
>>
>>
>>
>> ______________________________**_________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
>>
>>
> --
> ------------------------------**------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------**------------------------------
> ______________________________**_________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130219/033d109d/attachment.html>