[yocto] Color ghosting on BeagleBoard xM rev C

[Darren Hart]

Jason, Koen,

Does anything spring to mind as an obvious fix for this? Perhaps some
kernel parameter initialization string for the graphics hardware?

--
Darren

On 07/15/2011 08:30 AM, Jeff Mitchell wrote:
> Darren Hart suggested I send this to the list...
> 
> Attached is a picture of my screen running Terminal. This is on a 
> BeagleBoard xM rev C connected via its HDMI out to a DVI adapter and 
> then into a Dell UltraSharp monitor. Angstrom doesn't display these 
> problems, so the setup should be fine.
> 
> I'm not quite sure what is causing this. The resolution is also fairly 
> low, and I haven't had any success using boot parameters (either the 
> older video=omapfb:mode variant or the newer DSS2 omapfb.mode variant).
> 
> Thanks,
> Jeff
> 
> 
> 
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel