[yocto] Adding machine for linux-yocto-stable
Bruce Ashfield
bruce.ashfield at windriver.com
Tue Feb 8 09:38:58 PST 2011
On 11-02-08 12:31 PM, Diego Sueiro wrote:
> Bruce,
>
> I've updated my yocto tree but I'm still getting this error:
>
> ERROR: Function 'do_kernel_checkout' failed (see
> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
> for further information)
> ERROR: Logfile of failure stored in:
> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
> Log data follows:
> | Fixing up git directory for standard/devkit8000
> | error: pathspec 'devkit8000-standard' did not match any file(s) known
> to git.
> | ERROR: Function 'do_kernel_checkout' failed (see
> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
> for further information)
> NOTE: package
> linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1:
> task do_kernel_checkout: Failed
> ERROR: Task 1
> (/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/linux-yocto-stable_git.bb
> <http://linux-yocto-stable_git.bb>, do_kernel_checkout) failed with exit
> code '1'
This is the typical BSP bootstrap 'problem'. Hold on for
just a little while longer, with the new fetcher changes
in master, I'm updating the recipes (literally now) to
fix this and am testing the workflow for adding a new board
as part of these changes.
Cheers,
Bruce
>
> I've tried this two options on
> SRCREV_machine_pn-linux-yocto-stable_devkit8000:
>
> "ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard branch
> "2b1caf6ed7b888c95a1909d343799672731651a5" = master branch
> "72ca49ab08b8eb475cec82a10049503602325791" = standard branch
>
>
> There isn't an specific devki8000 branch.
>
> Regards,
>
> --
> *dS
> Diego Sueiro
>
> /*long live rock 'n roll*/
>
>
> On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield
> <bruce.ashfield at windriver.com <mailto:bruce.ashfield at windriver.com>> wrote:
>
> On 11-02-08 08:46 AM, Diego Sueiro wrote:
>
> Folks,
>
> I'm trying to get devkit8000 kernel compiled with
> linux-yocto-stable recipe.
> I've added devkit8000 on COMPATIBLE_MACHINE and on
> KMACHINE_dekvkit800.
>
> But I don't know what pokylinux branch to use to make the kernel
> build
> works.
>
> I believe that I have to config these variables:
>
> LINUX_KERNEL_TYPE
>
>
> This one defaults to something sane, so you don't need
> to set this line.
>
>
> SRCREV_machine_pn-linux-yocto-stable_devkit8000
>
>
> You would need to set this, to a SRCREV of the branch you'll
> end up building.
>
>
>
> Any suggestions?
>
>
> Are you working out of an up to date master ? I've made some
> changes recently that allow BSPs to bootstrap/reuse existing
> branches. If you aren't on the latest master the procedure
> is different.
>
> Cheers,
>
> Bruce
>
>
> Regards,
>
> --
> *dS
> Diego Sueiro
>
> /*long live rock 'n roll*/
>
>
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> https://lists.yoctoproject.org/listinfo/yocto
>
>
>
More information about the yocto
mailing list