[yocto] Adding machine for linux-yocto-stable

[Diego Sueiro]

Bruce,

I've updated my yocto tree but I'm still getting this error:

ERROR: Function 'do_kernel_checkout' failed (see
/home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
for further information)
ERROR: Logfile of failure stored in:
/home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
Log data follows:
| Fixing up git directory for standard/devkit8000
| error: pathspec 'devkit8000-standard' did not match any file(s) known to
git.
| ERROR: Function 'do_kernel_checkout' failed (see
/home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
for further information)
NOTE: package
linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1:
task do_kernel_checkout: Failed
ERROR: Task 1 (/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/
linux-yocto-stable_git.bb, do_kernel_checkout) failed with exit code '1'

I've tried this two options
on SRCREV_machine_pn-linux-yocto-stable_devkit8000:

"ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard branch
"2b1caf6ed7b888c95a1909d343799672731651a5" = master branch
"72ca49ab08b8eb475cec82a10049503602325791" = standard branch


There isn't an specific devki8000 branch.

Regards,

--
*dS
Diego Sueiro

/*long live rock 'n roll*/


On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield <
bruce.ashfield at windriver.com> wrote:

> On 11-02-08 08:46 AM, Diego Sueiro wrote:
>
>> Folks,
>>
>> I'm trying to get devkit8000 kernel compiled with linux-yocto-stable
>> recipe.
>> I've added devkit8000 on COMPATIBLE_MACHINE and on KMACHINE_dekvkit800.
>>
>> But I don't know what pokylinux branch to use to make the kernel build
>> works.
>>
>> I believe that I have to config these variables:
>>
>>    LINUX_KERNEL_TYPE
>>
>
> This one defaults to something sane, so you don't need
> to set this line.
>
>
>     SRCREV_machine_pn-linux-yocto-stable_devkit8000
>>
>
> You would need to set this, to a SRCREV of the branch you'll
> end up building.
>
>
>>
>> Any suggestions?
>>
>
> Are you working out of an up to date master ? I've made some
> changes recently that allow BSPs to bootstrap/reuse existing
> branches. If you aren't on the latest master the procedure
> is different.
>
> Cheers,
>
> Bruce
>
>
>> Regards,
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> /*long live rock 'n roll*/
>>
>>
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110208/d90a192a/attachment.html>