[yocto] Adding machine for linux-yocto-stable

[Diego Sueiro]

Bruce,

I'm getting this error for linux-libc-headers-yocto too.


ERROR: Function 'opkg-build execution failed' failed
ERROR: Logfile of failure stored in:
/home/dev-2/yocto/build/tmp/work/armv7a-poky-linux-gnueabi/linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2/temp/log.do_package_write_ipk.16387
Log data follows:
| ar:
/home/dev-2/yocto/build/tmp/work/armv7a-poky-linux-gnueabi/linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2/deploy-ipks/armv7a/linux-libc-headers-yocto-dbg_2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2_armv7a.ipk:
No such file or directory
| ERROR: Function 'opkg-build execution failed' failed
NOTE: package
linux-libc-headers-yocto-2.6.37+git-4+343c06b25b221aa7f7019aee83b2d976041fddce_2+yocto/standard/base-r2:
task opkg-build execution failed: Failed
ERROR: Task 547
(/home/dev-2/yocto/poky/meta/recipes-kernel/linux-libc-headers/
linux-libc-headers-yocto_git.bb, do_package_write_ipk) failed with exit code
'1'


Regards,

--
*dS
Diego Sueiro

/*long live rock 'n roll*/


On Tue, Feb 8, 2011 at 3:38 PM, Bruce Ashfield <bruce.ashfield at windriver.com
> wrote:

> On 11-02-08 12:31 PM, Diego Sueiro wrote:
>
>> Bruce,
>>
>> I've updated my yocto tree but I'm still getting this error:
>>
>> ERROR: Function 'do_kernel_checkout' failed (see
>>
>> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
>> for further information)
>> ERROR: Logfile of failure stored in:
>>
>> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
>> Log data follows:
>> | Fixing up git directory for standard/devkit8000
>> | error: pathspec 'devkit8000-standard' did not match any file(s) known
>> to git.
>> | ERROR: Function 'do_kernel_checkout' failed (see
>>
>> /home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
>> for further information)
>> NOTE: package
>>
>> linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1:
>> task do_kernel_checkout: Failed
>> ERROR: Task 1
>> (/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/
>> linux-yocto-stable_git.bb
>> <http://linux-yocto-stable_git.bb>, do_kernel_checkout) failed with exit
>> code '1'
>>
>
> This is the typical BSP bootstrap 'problem'. Hold on for
> just a little while longer, with the new fetcher changes
> in master, I'm updating the recipes (literally now) to
> fix this and am testing the workflow for adding a new board
> as part of these changes.
>
> Cheers,
>
> Bruce
>
>
>> I've tried this two options on
>> SRCREV_machine_pn-linux-yocto-stable_devkit8000:
>>
>>    "ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard
>> branch
>>    "2b1caf6ed7b888c95a1909d343799672731651a5" = master branch
>>    "72ca49ab08b8eb475cec82a10049503602325791" = standard branch
>>
>>
>> There isn't an specific devki8000 branch.
>>
>> Regards,
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> /*long live rock 'n roll*/
>>
>>
>> On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield
>> <bruce.ashfield at windriver.com <mailto:bruce.ashfield at windriver.com>>
>> wrote:
>>
>>    On 11-02-08 08:46 AM, Diego Sueiro wrote:
>>
>>        Folks,
>>
>>        I'm trying to get devkit8000 kernel compiled with
>>        linux-yocto-stable recipe.
>>        I've added devkit8000 on COMPATIBLE_MACHINE and on
>>        KMACHINE_dekvkit800.
>>
>>        But I don't know what pokylinux branch to use to make the kernel
>>        build
>>        works.
>>
>>        I believe that I have to config these variables:
>>
>>        LINUX_KERNEL_TYPE
>>
>>
>>    This one defaults to something sane, so you don't need
>>    to set this line.
>>
>>
>>        SRCREV_machine_pn-linux-yocto-stable_devkit8000
>>
>>
>>    You would need to set this, to a SRCREV of the branch you'll
>>    end up building.
>>
>>
>>
>>        Any suggestions?
>>
>>
>>    Are you working out of an up to date master ? I've made some
>>    changes recently that allow BSPs to bootstrap/reuse existing
>>    branches. If you aren't on the latest master the procedure
>>    is different.
>>
>>    Cheers,
>>
>>    Bruce
>>
>>
>>        Regards,
>>
>>        --
>>        *dS
>>        Diego Sueiro
>>
>>        /*long live rock 'n roll*/
>>
>>
>>
>>        _______________________________________________
>>        yocto mailing list
>>        yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
>>
>>        https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110208/7fb39bca/attachment.html>