[meta-freescale] Fwd: Building Qt5 with eglfs support for imx6slevk
Ingmar Sittl
ingmar.sittl at elektrobit.com
Mon May 30 06:23:40 PDT 2016
Hi,
the i.mx6SoloLite (which is what I assume imx6sl stands for) does not support
OpenGL ES:
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/i.mx6qp/i.mx-6sololite-processors-single-core-low-power-epd-controller-arm-cortex-a9-core:i.MX6SL
The SoC should still support OpenVG, but afaik Qt5 no longer supports OpenVG
rendering, your probably need to go back to Qt 4.8 for that.
Regards,
Ingmar
On 24.05.2016 01:03, nish wick wrote:
>
> Hello,
> I am trying to make a build for a board based on imx6slevk. I need to add Qt5
> with eglfs support. I am using the Jethro branch both on fsl-community-bsp and
> meta-qt5.
>
> I have followed the following docs:
> https://github.com/Freescale/fsl-community-bsp-platform
> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
>
> My build does not get Qt configured for eglfs. (from Qt config out put). I am
> able to get it work with linuxfb successfully.
>
> OpenGL / OpenVG:
> EGL .................. no
> OpenGL ............... no
> OpenVG ............... no
> PCRE ................... yes (bundled copy)
> pkg-config ............. yes
> PulseAudio ............. yes
> QPA backends:
> DirectFB ............. no
> EGLFS ................ no
> EGLFS i.MX6....... . no
> EGLFS KMS .......... no
> EGLFS Mali ......... no
> EGLFS Raspberry Pi . no
> EGLFS X11 .......... no
> LinuxFB .............. yes
> XCB .................. no
>
> So I added the following to my local.conf after doing further research:
> PACKAGECONFIG_append_pn-qtbase = " gles2 "
>
> Now It complaints like this:
> ERROR: Nothing PROVIDES 'virtual/libgles2' (but
> /home/nw/Yocto/fsl-community-bsp/sources/meta-qt5/recipes-qt/qt5/qtbase_git.bb
> <http://qtbase_git.bb> DEPENDS on or otherwise requires it). Close matches:
> virtual/libgl
> virtual/libg2d
> virtual/libsdl2
> NOTE: Runtime target 'qtbase-fonts' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['qtbase-fonts', 'virtual/libgles2']
> ERROR: Required build target 'fsl-image-multimedia-full' has no buildable
> providers.
> Missing or unbuildable dependency chain was: ['fsl-image-multimedia-full',
> 'qtbase-fonts', 'virtual/libgles2']
>
> Any help is appreciated.
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20160530/39ca1e0d/attachment.html>
More information about the meta-freescale
mailing list