[meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards

[Gary Thomas]

On 2015-01-28 07:27, zhenhua.luo at freescale.com wrote:
> Hi ,
>
> UBOOT_CONFIG is set in machine conf, UBOOT_MACHINE and UBOOT_CONFIG can't be set at the same time.
>
> Try to add the following line in local.conf to override the default value and build again.
>
> UBOOT_CONFIG = "sdcard"

I still get the same error.

>> -----Original Message-----
>> From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
>> bounces at yoctoproject.org] On Behalf Of Gary Thomas
>> Sent: Wednesday, January 28, 2015 9:55 PM
>> To: meta-freescale at yoctoproject.org
>> Subject: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards
>>
>> Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
>>
>> When I tried
>>     MACHINE=ls1021atwr bitbake u-boot-ls1 I get this error:
>>     ERROR: Nothing PROVIDES 'u-boot-ls1'
>>     ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
>>
>> I had to add this line to my local.conf to get it to build:
>>     UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
>>
>> What is the "correct" way to build U-Boot for this board?
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas                 |  Consulting for the
>> MLB Associates              |    Embedded world
>> ------------------------------------------------------------
>> --
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------