[meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards

[zhenhua.luo at freescale.com]

Hi , 

UBOOT_CONFIG is set in machine conf, UBOOT_MACHINE and UBOOT_CONFIG can't be set at the same time.

Try to add the following line in local.conf to override the default value and build again. 

UBOOT_CONFIG = "sdcard"


Best Regards,

Zhenhua

> -----Original Message-----
> From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
> bounces at yoctoproject.org] On Behalf Of Gary Thomas
> Sent: Wednesday, January 28, 2015 9:55 PM
> To: meta-freescale at yoctoproject.org
> Subject: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards
> 
> Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
> 
> When I tried
>    MACHINE=ls1021atwr bitbake u-boot-ls1 I get this error:
>    ERROR: Nothing PROVIDES 'u-boot-ls1'
>    ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
> 
> I had to add this line to my local.conf to get it to build:
>    UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
> 
> What is the "correct" way to build U-Boot for this board?
> 
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale