[meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards

[zhenhua.luo at freescale.com]

Can you share your reproducible steps?

The following is my step and ongoing build log: 
$ git clone git://git.yoctoproject.org/poky
$ cd poky
$ git clone git://git.yoctoproject.org/meta-fsl-arm
$ . ./oe-init-build-env ls1021atwr
Add 'UBOOT_CONFIG = "sdcard"' in conf/local.conf
Edit conf/bblayers.conf to append absolute path if meta-fsl-arm layer in BBLAYERS
$ MACHINE=ls1021atwr bitbake u-boot-ls1
Parsing recipes: 100% |#####################################################################################################| Time: 00:00:19
Parsing of 949 .bb files complete (0 cached, 949 parsed). 1355 targets, 99 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.25.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "ls1021atwr"
DISTRO            = "poky"
DISTRO_VERSION    = "1.7"
TUNE_FEATURES     = "arm armv7a vfp neon callconvention-hard cortexa7"
TARGET_FPU        = "vfp-neon"
meta              
meta-yocto        
meta-yocto-bsp    = "master:07f2eca7e9f9163ec48d3a417d8ba885a84762f3"
meta-fsl-arm      = "master:2d9b23e7ca473eaf33b8a96839686a331339e43a"

NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL ftp://ftp.gmplib.org/pub/gmp-6.0.0/gmp-6.0.0a.tar.bz2, attempting MIRRORS if available
Currently 4 running tasks (318 of 379):
0: glibc-2.20-r0 do_compile (pid 14097)
1: u-boot-ls1-tools-native-2013.10-r0 do_fetch (pid 21974)
2: binutils-native-2.24-r0 do_compile (pid 8695)
3: rpm-native-5.4.14-r0 do_configure (pid 21731)
...


Best Regards,

Zhenhua

> -----Original Message-----
> From: Gary Thomas [mailto:gary at mlbassoc.com]
> Sent: Wednesday, January 28, 2015 10:41 PM
> To: Luo Zhenhua-B19537
> Cc: meta-freescale at yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards
> 
> On 2015-01-28 07:27, zhenhua.luo at freescale.com wrote:
> > Hi ,
> >
> > UBOOT_CONFIG is set in machine conf, UBOOT_MACHINE and
> UBOOT_CONFIG can't be set at the same time.
> >
> > Try to add the following line in local.conf to override the default value and
> build again.
> >
> > UBOOT_CONFIG = "sdcard"
> 
> I still get the same error.
> 
> >> -----Original Message-----
> >> From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
> >> bounces at yoctoproject.org] On Behalf Of Gary Thomas
> >> Sent: Wednesday, January 28, 2015 9:55 PM
> >> To: meta-freescale at yoctoproject.org
> >> Subject: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1
> >> boards
> >>
> >> Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
> >>
> >> When I tried
> >>     MACHINE=ls1021atwr bitbake u-boot-ls1 I get this error:
> >>     ERROR: Nothing PROVIDES 'u-boot-ls1'
> >>     ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
> >>
> >> I had to add this line to my local.conf to get it to build:
> >>     UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
> >>
> >> What is the "correct" way to build U-Boot for this board?
> >>
> >> --
> >> ------------------------------------------------------------
> >> Gary Thomas                 |  Consulting for the
> >> MLB Associates              |    Embedded world
> >> ------------------------------------------------------------
> >> --
> >> _______________________________________________
> >> meta-freescale mailing list
> >> meta-freescale at yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/meta-freescale
> 
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------