[meta-freescale] Unable to get u-boot running on i.MX6 SABRE for Smart Devices Eval Board

[Wally Yeh]

>As I said on the other e-mail you need to use the u-boot.imx file, not
>the u-boot.bin one. Another change needed for mfgtool xml file is the
>dd command which needs the removal of 'seek=2' as it has no padding..

Otavio is correct, I use u-boot.imx to boot my board. and must wirte it
into my eMMC at 0x2 by uboot mmc write command.
so if you using dd, make sure bs=512 seek=2 appended.

Wally


2014-11-05 23:54 GMT+08:00 Otavio Salvador <otavio at ossystems.com.br>:

> On Wed, Nov 5, 2014 at 1:50 PM, Guillaume Fournier
> <gfournier at brioconcept.com> wrote:
> >>> The ultimate goal is to have a cross-compiler build environment that
> works for both u-boot and kernel development.  For now, I used Yocto to
> generate the toolchain (using meta-toolchain as specified in my first post)
> as described in section 3.4 of the Yocto Project Application Developer's
> Guide.
> >>
> >>I am failing to see what is missing? I use the toolchain for kernel and
> u-boot development with no issues. What problems you are facing?
> >>
> >>--
> >>Otavio Salvador                             O.S. Systems
> >
> > I know it is a long post but could you read the first email I sent to
> the mailing list? I think this will sum it up for you.  Except for the last
> bit where I used the mfgtools instead of the cfimager (I changed after
> Daiane suggestion), everything is still relevant.  Thanks for stepping in
> Otavio.
>
> As I said on the other e-mail you need to use the u-boot.imx file, not
> the u-boot.bin one. Another change needed for mfgtool xml file is the
> dd command which needs the removal of 'seek=2' as it has no padding..
>
>
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20141105/c41c6a48/attachment.html>