[meta-freescale] Unable to get u-boot running on i.MX6 SABRE for Smart Devices Eval Board

[Otavio Salvador]

On Wed, Nov 5, 2014 at 1:50 PM, Guillaume Fournier
<gfournier at brioconcept.com> wrote:
>>> The ultimate goal is to have a cross-compiler build environment that works for both u-boot and kernel development.  For now, I used Yocto to generate the toolchain (using meta-toolchain as specified in my first post) as described in section 3.4 of the Yocto Project Application Developer's Guide.
>>
>>I am failing to see what is missing? I use the toolchain for kernel and  u-boot development with no issues. What problems you are facing?
>>
>>--
>>Otavio Salvador                             O.S. Systems
>
> I know it is a long post but could you read the first email I sent to the mailing list? I think this will sum it up for you.  Except for the last bit where I used the mfgtools instead of the cfimager (I changed after Daiane suggestion), everything is still relevant.  Thanks for stepping in Otavio.

As I said on the other e-mail you need to use the u-boot.imx file, not
the u-boot.bin one. Another change needed for mfgtool xml file is the
dd command which needs the removal of 'seek=2' as it has no padding..


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750