[meta-freescale] Cannot boot after the last update...

[Daiane Angolini]

On Wed, Jul 30, 2014 at 2:26 PM, Daiane Angolini <daiane.list at gmail.com> wrote:
> On Wed, Jul 30, 2014 at 9:41 AM, Konstantin Kovalev
> <lepeletie at hotmail.com> wrote:
>> Today I have done "repo sync" and rebuilt my image but it stopped on "login:" again. So, my issue is still existing. Moreover, I faced this "mmcblk1p2" problem. It seems that I should rebuild my image completely (including kernel). So, how can I do this properly? ("-c cleanall -f" doesn't allow me to do that).
>>
>
> I did not understand your question. If you have "repo sync"-ed and the
> fix is downloaded, YP will rebuild anything needed.
>
> If you want to make sure twice, bitbake virtual/kernel -c cleansstate
> and bitbake u-boot-fslc -c cleansstate
>
>
> I still can *not* reproduce the issue. For me, it works, it reaches
> the prompt I can login and I can find / until the end. And I still
> have the board control.
>
> I have tested with imx6Q TO1.1 and TO 1.2

And, I tested with imx6slevk as well, and it´s working.


Only reporting

Daiane
>
> Daiane
>
>
>> Best Regards,
>> Konstantin.
>>
>> ----------------------------------------
>>> Date: Mon, 28 Jul 2014 15:58:51 -0300
>>> Subject: Re: [meta-freescale] Cannot boot after the last update...
>>> From: daiane.list at gmail.com
>>> To: otavio at ossystems.com.br
>>> CC: lepeletie at hotmail.com; meta-freescale at yoctoproject.org
>>>
>>> On Mon, Jul 28, 2014 at 12:37 PM, Otavio Salvador
>>> <otavio at ossystems.com.br> wrote:
>>>> On Mon, Jul 28, 2014 at 11:26 AM, Konstantin Kovalev
>>>> <lepeletie at hotmail.com> wrote:
>>>>> I really glad to hear this. Perhaps you could add your boot log so that I could compare it with mine. I guess that it can help me somehow.
>>>>> Thanks in advance.
>>>>
>>>> I sent an u-boot-fslc update which should address this issue. Can you
>>>> test master-next or apply it and test?
>>>
>>> I tested over here and it worked for me
>>>
>>>
>>> Daiane
>>