[meta-freescale] Cannot boot after the last update...

[Daiane Angolini]

On Wed, Jul 30, 2014 at 3:05 PM, Daiane Angolini <daiane.list at gmail.com> wrote:
> On Wed, Jul 30, 2014 at 2:26 PM, Daiane Angolini <daiane.list at gmail.com> wrote:
>> On Wed, Jul 30, 2014 at 9:41 AM, Konstantin Kovalev
>> <lepeletie at hotmail.com> wrote:
>>> Today I have done "repo sync" and rebuilt my image but it stopped on "login:" again. So, my issue is still existing. Moreover, I faced this "mmcblk1p2" problem. It seems that I should rebuild my image completely (including kernel). So, how can I do this properly? ("-c cleanall -f" doesn't allow me to do that).
>>>
>>
>> I did not understand your question. If you have "repo sync"-ed and the
>> fix is downloaded, YP will rebuild anything needed.
>>
>> If you want to make sure twice, bitbake virtual/kernel -c cleansstate
>> and bitbake u-boot-fslc -c cleansstate
>>
>>
>> I still can *not* reproduce the issue. For me, it works, it reaches
>> the prompt I can login and I can find / until the end. And I still
>> have the board control.
>>
>> I have tested with imx6Q TO1.1 and TO 1.2
>
> And, I tested with imx6slevk as well, and it´s working.

I reproduced the freeze issue using imx6qsabresd and X11!

So, it´s x11 startup error.



Daiane
>
>
> Only reporting
>
> Daiane
>>
>> Daiane
>>
>>
>>> Best Regards,
>>> Konstantin.
>>>
>>> ----------------------------------------
>>>> Date: Mon, 28 Jul 2014 15:58:51 -0300
>>>> Subject: Re: [meta-freescale] Cannot boot after the last update...
>>>> From: daiane.list at gmail.com
>>>> To: otavio at ossystems.com.br
>>>> CC: lepeletie at hotmail.com; meta-freescale at yoctoproject.org
>>>>
>>>> On Mon, Jul 28, 2014 at 12:37 PM, Otavio Salvador
>>>> <otavio at ossystems.com.br> wrote:
>>>>> On Mon, Jul 28, 2014 at 11:26 AM, Konstantin Kovalev
>>>>> <lepeletie at hotmail.com> wrote:
>>>>>> I really glad to hear this. Perhaps you could add your boot log so that I could compare it with mine. I guess that it can help me somehow.
>>>>>> Thanks in advance.
>>>>>
>>>>> I sent an u-boot-fslc update which should address this issue. Can you
>>>>> test master-next or apply it and test?
>>>>
>>>> I tested over here and it worked for me
>>>>
>>>>
>>>> Daiane
>>>