[meta-freescale] Build error occured when build "fsl-image-fb" and "fsl-image-weston"

[kongling]

Hi,
    Thanks for your reply!

    I checked local.conf in "fsl-arm-yocto-bsp/build/conf" and "fsl-arm-yocto-bsp/conf". There was no "DISTRO_FEATURE_remove = "x11 wayland directfb"" in them .
    After this, I added "DISTRO_FEATURE_remove = "x11 wayland directfb"" in these two files, but it still failed with the same error.

BR,
kongling


> From: Lauren.Post at freescale.com
> To: k870818319 at outlook.com; meta-freescale at yoctoproject.org
> Subject: RE: [meta-freescale] Build error occured when build "fsl-image-fb" and	"fsl-image-weston"
> Date: Tue, 26 Aug 2014 14:52:52 +0000
> 
> You are using our release layer for GA.
> 
> You can use daisy community which also has 3.10.17 if you want.
> 
> You are doing everything right for setting up frame buffer (note for wayland/Weston you need a separate build)
> 
> What I would check is local.conf and make sure in local.conf there is a DISTRO_FEATURE_remove = "x11 wayland directfb"
> 
> fsl-image-fb is in the meta-fsl-bsp-release layer and bblayer.conf is what hooks it in (through our fsl-setup-release script you run).
> 
> fsl-image-fb has a check for distro features so if the distro features do not match it can fail but not usually in the error you mentioned.
> 
> Regards,
> Lauren Post
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140828/4caa4896/attachment-0001.html>