[meta-freescale] Wandboard U-boot (2013.07-rc3) issues

[Marek Vasut]

Dear Diego Sueiro,

> The issue is still reproduced with v2013.04 patched version:
> 
> U-Boot 2013.04 (Aug 07 2013 - 11:32:45)
> 
> CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
> Reset cause: POR
> Board: Wandboard
> DRAM:  1 GiB
> MMC:   FSL_SDHC: 0
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> Net:   FEC [PRIME]
> Warning: FEC using MAC address from net device
> 
> Hit any key to stop autoboot:  0
> mmc0 is current device
> Card did not respond to voltage select!
> Booting from net ...
> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> BOOTP broadcast 1
> BOOTP broadcast 2
> 

Maybe your board is defective ...

Best regards,
Marek Vasut