[meta-freescale] Wandboard U-boot (2013.07-rc3) issues
Diego Sueiro
diego.sueiro at gmail.com
Wed Aug 7 07:36:15 PDT 2013
The issue is still reproduced with v2013.04 patched version:
U-Boot 2013.04 (Aug 07 2013 - 11:32:45)
CPU: Freescale i.MX6DL rev1.1 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM: 1 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: FEC [PRIME]
Warning: FEC using MAC address from net device
Hit any key to stop autoboot: 0
mmc0 is current device
Card did not respond to voltage select!
Booting from net ...
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
Abraços,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Wed, Aug 7, 2013 at 8:49 AM, Otavio Salvador <otavio at ossystems.com.br>wrote:
> On Wed, Aug 7, 2013 at 8:49 AM, Otavio Salvador <otavio at ossystems.com.br>
> wrote:
> > On Wed, Aug 7, 2013 at 8:33 AM, Diego Sueiro <diego.sueiro at gmail.com>
> wrote:
> >> Hi there,
> >>
> >> I believe that v2013.04 is not using the right default environment
> values
> >> because of the error message below.
> >>
> >> U-Boot 2013.04 (Aug 07 2013 - 08:06:08)
> >>
> >> CPU: Freescale i.MX6DL rev1.1 at 792 MHz
> >> Reset cause: POR
> >> Board: Wandboard
> >> DRAM: 1 GiB
> >> MMC: FSL_SDHC: 0
> >> *** Warning - bad CRC, using default environment
> >>
> >> In: serial
> >> Out: serial
> >> Err: serial
> >> Net: FEC [PRIME]
> >> Warning: FEC using MAC address from net device
> >>
> >> Hit any key to stop autoboot: 0
> >> mmc0 is current device
> >> ** Unrecognized filesystem type **
> >> ** Unrecognized filesystem type **
> >> Booting from net ...
> >> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> >> BOOTP broadcast 1
> >> BOOTP broadcast 2
> >> BOOTP broadcast 3
> >>
> >> Anyone has this binary version to send me?
> >
> > You can build it but use our branch which had the env and backports:
> >
> > https://github.com/Freescale/u-boot-imx/tree/patches-2012.04.01
>
> https://github.com/Freescale/u-boot-imx/tree/patches-2013.04 , sorry.
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://projetos.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130807/10ee9bdf/attachment.html>
More information about the meta-freescale
mailing list