[meta-freescale] Wandboard U-boot (2013.07-rc3) issues

[Diego Sueiro]

Marek,

This could be possible, but it not happens with 2GB uSD from Kingston.

--
* dS
Diego Sueiro
Sent from my droid phone.
Em 07/08/2013 14:29, "Marek Vasut" <marex at denx.de> escreveu:

> Dear Diego Sueiro,
>
> > The issue is still reproduced with v2013.04 patched version:
> >
> > U-Boot 2013.04 (Aug 07 2013 - 11:32:45)
> >
> > CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
> > Reset cause: POR
> > Board: Wandboard
> > DRAM:  1 GiB
> > MMC:   FSL_SDHC: 0
> > *** Warning - bad CRC, using default environment
> >
> > In:    serial
> > Out:   serial
> > Err:   serial
> > Net:   FEC [PRIME]
> > Warning: FEC using MAC address from net device
> >
> > Hit any key to stop autoboot:  0
> > mmc0 is current device
> > Card did not respond to voltage select!
> > Booting from net ...
> > FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> > BOOTP broadcast 1
> > BOOTP broadcast 2
> >
>
> Maybe your board is defective ...
>
> Best regards,
> Marek Vasut
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130807/1ad36a2b/attachment.html>