[meta-freescale] Wandboard U-boot (2013.07-rc3) issues

[Otavio Salvador]

On Wed, Aug 7, 2013 at 8:49 AM, Otavio Salvador <otavio at ossystems.com.br> wrote:
> On Wed, Aug 7, 2013 at 8:33 AM, Diego Sueiro <diego.sueiro at gmail.com> wrote:
>> Hi there,
>>
>> I believe that v2013.04 is not using the right default environment values
>> because of the error message below.
>>
>> U-Boot 2013.04 (Aug 07 2013 - 08:06:08)
>>
>> CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
>> Reset cause: POR
>> Board: Wandboard
>> DRAM:  1 GiB
>> MMC:   FSL_SDHC: 0
>> *** Warning - bad CRC, using default environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   FEC [PRIME]
>> Warning: FEC using MAC address from net device
>>
>> Hit any key to stop autoboot:  0
>> mmc0 is current device
>> ** Unrecognized filesystem type **
>> ** Unrecognized filesystem type **
>> Booting from net ...
>> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
>> BOOTP broadcast 1
>> BOOTP broadcast 2
>> BOOTP broadcast 3
>>
>> Anyone has this binary version to send me?
>
> You can build it but use our branch which had the env and backports:
>
> https://github.com/Freescale/u-boot-imx/tree/patches-2012.04.01

https://github.com/Freescale/u-boot-imx/tree/patches-2013.04 , sorry.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750