[yocto] Removing hostapd init file

Kristupas Savickas kristupas.savickas at teltonika.lt
Mon Oct 22 23:03:47 PDT 2018


Greetings,

I'm trying to remove the hostapd init file as I'll handle startup of it 
on my own. I've created a .bbappend file in my layer to do this:

    do_install_append() {
         rm -rf ${D}${sysconfdir}/init.d
    }

However, this results in a compilation warning when building my image 
and the ipk-postinst is still being run on my target:

    WARNING: tlt-image-1.0-r0 do_rootfs: hostapd.postinst returned 1,
    marking as unpacked only, configuration required on target.
    WARNING: tlt-image-1.0-r0 do_rootfs: Intentionally failing
    postinstall scriptlets of ['hostapd'] to defer them to first boot is
    deprecated. Please place them into pkg_postinst_ontarget_${PN} ().
    If deferring to first boot wasn't the intent, then scriptlet failure
    may mean an issue in the recipe, or a regression elsewhere.
    Details of the failure are in
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/log.do_rootfs.
    WARNING: tlt-image-1.0-r0 do_rootfs: [log_check] tlt-image: found 1
    warning message in the logfile:
    [log_check] WARNING: Intentionally failing postinstall scriptlets of
    ['hostapd'] to defer them to first boot is deprecated. Please place
    them into pkg_postinst_ontarget_${PN} ().


I tried setting INITSCRIPT_NAME to "" in my .bbappend, but it fails with 
an error during do_rootfs task of my image:

    cat
    build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/log.do_rootfs.24919
    | grep hostapd
    NOTE: Found hostapd-dbg_2.6-r0_armv7ahf-neon.ipk in Packages, but
    mtime differs - re-reading
    Found hostapd-dev_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime
    differs - re-reading
    Found hostapd_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime
    differs - re-reading
    NOTE: Installing the following packages: android-system-core-adbd
    android-system-core-liblog android-system-core-usb ap6212 avlcommd
    base-files base-passwd boot-config config-backup curl dnsmasq
    dropbear ethtool eventslog factory-restore firewall3 fsl-rc-local
    gps-control gps-utils gpsd gpsd-conf gsmd hostapd iio-utils iiod
    iproute2 iptables iputils iw kernel-modules libcutils0 libglib-2.0-0
    libnl-3-200 libstdc++6 libtlt-lua libxml2 lsm6dsl-rebind lsqlite3
    luci lucihttp mnf-info motion-monitor mtd-utils-ubifs netifd openssl
    os-release packagegroup-core-boot perl ppp preinit procd qmuxd
    recgend rpcd run-postinsts shadow sms-utilities sqlite3 storage
    sysntpd system sysup tlt-base-files tlt-connection-manager
    tlt-eventslog-lua tzdata ubus uhttpd update-rc.d ustream-ssl
    NOTE:
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-native/usr/bin/opkg
    --volatile-cache -f
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
    -t
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
    -o
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs
    --force_postinstall --prefer-arch-to-version
    --no-install-recommends  --force-overwrite install
    android-system-core-adbd android-system-core-liblog
    android-system-core-usb ap6212 avlcommd base-files base-passwd
    boot-config config-backup curl dnsmasq dropbear ethtool eventslog
    factory-restore firewall3 fsl-rc-local gps-control gps-utils gpsd
    gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables iputils iw
    kernel-modules libcutils0 libglib-2.0-0 libnl-3-200 libstdc++6
    libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info
    motion-monitor mtd-utils-ubifs netifd openssl os-release
    packagegroup-core-boot perl ppp preinit procd qmuxd recgend rpcd
    run-postinsts shadow sms-utilities sqlite3 storage sysntpd system
    sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua tzdata
    ubus uhttpd update-rc.d ustream-ssl
    ERROR: Unable to install packages. Command
    '/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-native/usr/bin/opkg
    --volatile-cache -f
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
    -t
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
    -o
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs
    --force_postinstall --prefer-arch-to-version
    --no-install-recommends  --force-overwrite install
    android-system-core-adbd android-system-core-liblog
    android-system-core-usb ap6212 avlcommd base-files base-passwd
    boot-config config-backup curl dnsmasq dropbear ethtool eventslog
    factory-restore firewall3 fsl-rc-local gps-control gps-utils gpsd
    gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables iputils iw
    kernel-modules libcutils0 libglib-2.0-0 libnl-3-200 libstdc++6
    libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info
    motion-monitor mtd-utils-ubifs netifd openssl os-release
    packagegroup-core-boot perl ppp preinit procd qmuxd recgend rpcd
    run-postinsts shadow sms-utilities sqlite3 storage sysntpd system
    sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua tzdata
    ubus uhttpd update-rc.d ustream-ssl' returned 255:
    Installing hostapd (2.6) on root
    Downloading
    file:/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/deploy/ipk/armv7ahf-neon/hostapd_2.6-r0_armv7ahf-neon.ipk.
    To remove package debris, try `opkg remove hostapd`.
    To re-attempt the install, try `opkg install hostapd`.
      * preinst_configure: Aborting installation of hostapd.

Any pointers of how I could accomplish my goal?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20181023/57583686/attachment-0001.html>


More information about the yocto mailing list