[yocto] DEPENDS=libusb1 | libusb-compat not building package

[Burton, Ross]

Yes, that's odd.  Can you share the recipe?

Ross

On Thu, 4 Oct 2018 at 19:24, Tim Hammer <tdhammer99 at gmail.com> wrote:

>
> Even with libusb1 in DEPENDS it fails. It may be in the configure script
> (which works fine "outside" of a bitbake build), but what I am confused
> about is the lack of any libusb content in my cc-tool build tree.
>
> When I added boost to the DEPENDS, I got the headers and libraries in
> recipe-sysroot/...
> I am not getting any libusb stuff there with libusb1 in DEPENDS.
>
>
> On Thu, Oct 4, 2018 at 2:01 PM Burton, Ross <ross.burton at intel.com> wrote:
>
>> The recipe you're after for DEPENDS is libusb1.  If that doesn't work
>> then there's a bug in the configure script.
>>
>> Ross
>> On Thu, 4 Oct 2018 at 18:19, Tim Hammer <tdhammer99 at gmail.com> wrote:
>> >
>> > I am trying to write a recipe for cc-tool (
>> https://sourceforge.net/projects/cctool/) and ran into the following
>> error during the build:
>> >
>> > | checking for libusb-1.0 >= 1.0.0... no
>> > | configure: error: Package requirements (libusb-1.0 >= 1.0.0) were not
>> met:
>> > |
>> > | No package 'libusb-1.0' found
>> >
>> >
>> > I have added "libusb1" and then tried "libusb-compat" and also "libusb"
>> as well as "libusb-1.0" to my recipe's DEPENDS but nothing gets
>> fetched/built.
>> >
>> > I previously encountered the same failure with Boost and adding it to
>> DEPENDS was the solution. What am I missing for libusb-1.0?
>> >
>> > Do I need to instead modify the configure input to look in a different
>> location for libusb-1.0?
>> > --
>> >
>> > .Tim
>> > --
>> > _______________________________________________
>> > yocto mailing list
>> > yocto at yoctoproject.org
>> > https://lists.yoctoproject.org/listinfo/yocto
>>
>
>
> --
>
> .Tim
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20181008/187742d7/attachment.html>