[yocto] Fwd: [meta-raspberrypi] Problem with adding udev rules

[Outback Dingo]

couldnt this have been a udev_append.bb

instead of writing your own my-rules
On Wed, Nov 7, 2018 at 6:46 PM Markus W <markus4dev at gmail.com> wrote:
>
> This my bb file and than I have added the following to local.conf IMAGE_INSTALL_append = " my-rules ...".
>
> SUMMARY = "My rules"
> LICENSE = "CLOSED"
> PR = "r1"
>
> SRC_URI = "file://90-interfaces.rules"
>
> do_install[nostamp] = "1"
> do_unpack[nostamp] = "1"
>
> do_install () {
>     install -d ${D}${sysconfdir}/udev/rules.d
>     install -m 0666 ${WORKDIR}/90-interfaces.rules ${D}/etc/udev/rules.d/90-interfaces.rules
>
> }
>
> FILES_${PN} += " /etc/udev/rules.d/90-interfaces.rules"
>
> PACKAGES = "${PN}"
> PROVIDES = "my-rules"
>
> Hope this helps
>
> /Markus
>
> On Wed, 7 Nov 2018 at 12:41, Outback Dingo <outbackdingo at gmail.com> wrote:
>>
>> so curious, as im trying to add 2 udev rules also that i require in my
>> build, so how was your recipe configured?
>>
>> mine keeps telling me i have a conflict between packages as they both
>> install files to the same name and same place
>> On Wed, Nov 7, 2018 at 4:53 PM Outback Dingo <outbackdingo at gmail.com> wrote:
>> >
>> >
>> >
>> > On Wed, Nov 7, 2018, 16:44 Markus W <markus4dev at gmail.com wrote:
>> >>
>> >> I have resolved this issue. My problem was that in my layer I have a
>> >> recipe-core and within that I had the following structure
>> >> udev/udev-extra-rules and udev-extra-rules.bb file and a files dir on
>> >> the same level.
>> >>
>> >> By renaming udev/udev-extra-rules to my-udev/my-udev-extra-rules it
>> >> suddenly worked.
>> >>
>> >> Cool
>> >>
>> >>
>> >> Regards,
>> >> Markus
>> >>
>> >> On Tue, 6 Nov 2018 at 14:06, Outback Dingo <outbackdingo at gmail.com> wrote:
>> >> >
>> >> > On Tue, Nov 6, 2018 at 11:57 AM Markus W <markus4dev at gmail.com> wrote:
>> >> > >
>> >> > > Hi!
>> >> > >
>> >> > > I want to append the rules in the
>> >> > > recipe-core/udev/udev-rules-rpi/99-com.rules with the rules below from
>> >> > > within my own recipe. I can´t figure out how to do that.
>> >> > >
>> >> > > I have tried to add those rules as separate rules file in a recipe in
>> >> > > my own layer. After the build I can see that the rules file is in the
>> >> > > correct directory /etc/udev/rules.d (next to 99-com.rules) but the
>> >> > > rules didn't get applied. The groups below I have created by
>> >> > > inheriting the useradd class (GROUPADD_PARAM_${PN} = "-r spi; -r i2c;
>> >> > > -r gpio") in a different layer with a higher priority than the layer
>> >> > > with the rules recipe.
>> >> > >
>> >> > > Not sure why this is not working. Any suggestions?
>> >> > >
>> >> > > 90-interfaces.rules file:
>> >> > >
>> >> > > SUBSYSTEM=="input", GROUP="input", MODE="0660"
>> >> > > SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
>> >> > > SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
>> >> > > SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"
>> >> > >
>> >> > > SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
>> >> > > SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\
>> >> > > chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\
>> >> > > chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770
>> >> > > /sys/devices/virtual/gpio;\
>> >> > > chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\
>> >> > > '"
>> >> > >
>> >> >
>> >> > might help to post the recipe used.....
>> >> >
>> >> >
>> >> > > Regards,
>> >> > > Markus
>> >> > > --
>> >> > > _______________________________________________
>> >> > > yocto mailing list
>> >> > > yocto at yoctoproject.org
>> >> > > https://lists.yoctoproject.org/listinfo/yocto