[yocto] Fwd: [meta-raspberrypi] Problem with adding udev rules

[Markus W]

This my bb file and than I have added the following to local.conf
IMAGE_INSTALL_append = " my-rules ...".

SUMMARY = "My rules"
LICENSE = "CLOSED"
PR = "r1"

SRC_URI = "file://90-interfaces.rules"

do_install[nostamp] = "1"
do_unpack[nostamp] = "1"

do_install () {
    install -d ${D}${sysconfdir}/udev/rules.d
    install -m 0666 ${WORKDIR}/90-interfaces.rules
${D}/etc/udev/rules.d/90-interfaces.rules

}

FILES_${PN} += " /etc/udev/rules.d/90-interfaces.rules"

PACKAGES = "${PN}"
PROVIDES = "my-rules"

Hope this helps

/Markus

On Wed, 7 Nov 2018 at 12:41, Outback Dingo <outbackdingo at gmail.com> wrote:

> so curious, as im trying to add 2 udev rules also that i require in my
> build, so how was your recipe configured?
>
> mine keeps telling me i have a conflict between packages as they both
> install files to the same name and same place
> On Wed, Nov 7, 2018 at 4:53 PM Outback Dingo <outbackdingo at gmail.com>
> wrote:
> >
> >
> >
> > On Wed, Nov 7, 2018, 16:44 Markus W <markus4dev at gmail.com wrote:
> >>
> >> I have resolved this issue. My problem was that in my layer I have a
> >> recipe-core and within that I had the following structure
> >> udev/udev-extra-rules and udev-extra-rules.bb file and a files dir on
> >> the same level.
> >>
> >> By renaming udev/udev-extra-rules to my-udev/my-udev-extra-rules it
> >> suddenly worked.
> >>
> >> Cool
> >>
> >>
> >> Regards,
> >> Markus
> >>
> >> On Tue, 6 Nov 2018 at 14:06, Outback Dingo <outbackdingo at gmail.com>
> wrote:
> >> >
> >> > On Tue, Nov 6, 2018 at 11:57 AM Markus W <markus4dev at gmail.com>
> wrote:
> >> > >
> >> > > Hi!
> >> > >
> >> > > I want to append the rules in the
> >> > > recipe-core/udev/udev-rules-rpi/99-com.rules with the rules below
> from
> >> > > within my own recipe. I can´t figure out how to do that.
> >> > >
> >> > > I have tried to add those rules as separate rules file in a recipe
> in
> >> > > my own layer. After the build I can see that the rules file is in
> the
> >> > > correct directory /etc/udev/rules.d (next to 99-com.rules) but the
> >> > > rules didn't get applied. The groups below I have created by
> >> > > inheriting the useradd class (GROUPADD_PARAM_${PN} = "-r spi; -r
> i2c;
> >> > > -r gpio") in a different layer with a higher priority than the layer
> >> > > with the rules recipe.
> >> > >
> >> > > Not sure why this is not working. Any suggestions?
> >> > >
> >> > > 90-interfaces.rules file:
> >> > >
> >> > > SUBSYSTEM=="input", GROUP="input", MODE="0660"
> >> > > SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
> >> > > SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
> >> > > SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"
> >> > >
> >> > > SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
> >> > > SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\
> >> > > chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\
> >> > > chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770
> >> > > /sys/devices/virtual/gpio;\
> >> > > chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\
> >> > > '"
> >> > >
> >> >
> >> > might help to post the recipe used.....
> >> >
> >> >
> >> > > Regards,
> >> > > Markus
> >> > > --
> >> > > _______________________________________________
> >> > > yocto mailing list
> >> > > yocto at yoctoproject.org
> >> > > https://lists.yoctoproject.org/listinfo/yocto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20181107/de0ec80a/attachment.html>