[yocto] porting gRPC into Yocto

[Simon Chamlian]

Thank you everyone for such a prompt response.

What do I do with the grpc_1.8.5.bb
<http://cgit.openembedded.org/meta-openembedded/tree/meta-networking/recipes-devtools/grpc/grpc_1.8.5.bb?h=master>
recipe file (sorry for my ignorance, it has been 1 day I am using Yocto)?

Simon




On Thu, Jun 21, 2018 at 2:29 PM, Rudolf J Streif <rudolf.streif at gmail.com>
wrote:

> Hi Simon,
>
> Thank you for using the Yocto Project and reaching out.
>
> For any open-source component that you would like to add to the Yocto
> Project I recommend that you first have a look at
> http://layers.openembedded.org/layerindex/branch/master/recipes/ and
> enter the name of the component. Chances are that somebody already did the
> work. This is indeed the case with gRPC: http://layers.openembedded.
> org/layerindex/recipe/72419/.
>
> If you cannot find a recipe for the component then you should look at how
> the component is built. Most C/C++ components use some sort of a build
> system such as GNU Autotools or CMake. The Yocto Project documentation has
> sections for the common build systems.
>
> I hope this answers your question.
>
> Rudi
>
> On 06/21/2018 11:15 AM, Simon Chamlian wrote:
>
> Hi,
>
> I just started using Yocto.
>
> Is there a detailed procedure on how I can port gRPC (for C or C++) into a
> Yocto project?
>
> Thanks,
>
> S
>
>
>
>
>
>
>
>
> --
> Rudolf J Streif
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20180621/058b3385/attachment.html>