[yocto] Issue in extracting Yocto Sdk

[AKASH BHARDWAJ]

./poky-glibc-x86_64-rpi-basic-image-cortexa7hf-neon-vfpv4-toolchain-2.4.3.sh
Poky (Yocto Project Reference Distro) SDK installer version 2.4.3
=================================================================
Enter target directory for SDK (default: /opt/poky/2.4.3):
/home/akash/rpil/rpi-build/tmp
The directory "/home/akash/rpil/rpi-build/tmp" already contains a SDK for
this architecture.
If you continue, existing files will be overwritten! Proceed[y/N]? y
Extracting SDK.........................................................
...................................................................done
Setting it up...SDK could not be set up. Relocate script unable to find
ld-linux.so. Abort!

Presently,I am facing this issue.How can I rectify it?


Here is the local.conf file

CONF_VERSION = "1"
> DESCRIPTION = "Yocto-image"
> # Local configuration for meta-rpi images
> # Yocto Project 2.4 Poky distribution [rocko] branch
> # This is a sysvinit system
>
> LICENSE = "CLOSED"
>
> BBMASK = "meta-raspberrypi/recipes-kernel/linux-firmware"
>
> PACKAGE_FEED_URIS = "
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-raspberrypi/tree/recipes-devtools/wiringPi/wiringpi_git.bb?h=master
> https://git.yoctoproject.org/cgit.cgi/poky/plain/meta/recipes-devtools/i2c-tools/i2c-tools_4.0.bb
> https://github.com/eMakerStudio/meta-rpi/tree/morty/recipes-devtools/pi-blaster/pi-blaster_git.bbappend
> https://git.pengutronix.de/cgit/imx/sdma-firmware"
>
> DISTRO_FEATURES = "ext2 pam opengl usbhost ${DISTRO_FEATURES_LIBC}  x11
> wayland"
>
> DISTRO_FEATURES_BACKFILL_CONSIDERED += "pulseaudio"
> DISTRO_FEATURES_append += "virtualization"
>
> IMAGE_INSTALL = "packagegroup-core-boot \
>     packagegroup-core-x11 \
>     packagegroup-lxde-base \
>     kernel-modules \
> "
>
> PREFERRED_PROVIDER_jpeg = "libjpeg-turbo"
> PREFERRED_PROVIDER_jpeg-native = "libjpeg-turbo-native"
>
> PREFERRED_PROVIDER_udev = "eudev"
> VIRTUAL-RUNTIME_init_manager = "sysvinit"
>
> MACHINE_FEATURES_remove = "apm"
>
> IMAGE_FSTYPES = "tar.xz ext3 rpi-sdimg "
>
> # override the meta-raspberrypi default 4.9 kernel
> PREFERRED_VERSION_linux-raspberrypi = "4.14%"
>
> # Choose the board you are building for
> #MACHINE="raspberrypi"
> #MACHINE="raspberrypi0"
> #MACHINE="raspberrypi0-wifi"
> #MACHINE="raspberrypi2"
> MACHINE = "raspberrypi3"
> #MACHINE="raspberrypi-cm"
> #MACHINE="raspberrypi-cm3"
>
> # Choices are Image or zImage if NOT using u-boot (no u-boot is the
> default)
> # Choices are uImage or zImage if using u-boot, though if you choose zImage
> # with u-boot you will also have to change the boot script boot command
> KERNEL_IMAGETYPE = "zImage"
>
> ENABLE_UART="1"
>
> #DL_DIR = "${HOME}/oe-sources"
>
> #SSTATE_DIR = "/oe4/rpi/sstate-cache"
>
> #TMPDIR = "/oe4/rpi/tmp-rocko"
>
> DISTRO = "poky"
> PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk "
>
> # i686 or x86_64
> SDKMACHINE = "x86_64"
>
> #EXTRA_IMAGE_FEATURES = "debug-tweaks"
>
>
>
> PACKAGECONFIG_append_pn-qemu-native = " sdl"
> PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
> USER_CLASSES = "image-mklibs image-prelink"
>
> PATCHRESOLVE = "noop"
>
> RM_OLD_IMAGE = "1"
>
> INHERIT += "rm_work"
>
>
>
>
> PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk "
>
>
> EXTRA_IMAGE_FEATURES += "tools-sdk tools-debug eclipse-debug tools-profile
> debug-tweaks "
>
> EXTRA_IMAGE_FEATURES += " package-management dev-pkgs "
>
> USER_CLASSES ?= "buildstats image-mklibs"
>
>
>
>
>
>
>
>
>
>
> GPU_MEM = "16"
>
>
> TOOLCHAIN_HOST_TASK += "nativesdk-cmake-dev"
> TOOLCHAIN_TARGET_TASK_append = " wiringpi-dev"
>
>
> IMAGE_INSTALL_APPEND = "git apt dpkg opkg rpm sudo wiringpi wiringpi-dev
> cmake connman connman-client tzdata i2c-tools i2c-tools-dev  pi-blaster
> pi-blaster-dev"
> CORE_IMAGE_EXTRA_INSTALL=" rpm opkg dpkg git sudo wiringpi apt
> wiringpi-dev cmake tzdata localedef i2c-tools i2c-tools-dev connman
> connman-client  pi-blaster pi-blaster-dev"
> IMAGE_INSTALL_append += "  bluez5 i2c-tools python-smbus bridge-utils
> hostapd dhcp-server iptables wpa-supplicant apache2  glibc-utils"
> ENABLE_UART="1"
> ENABLE_SPI_BUS= "1"
> ENABLE_I2C = "1"
> ENABLE_PCF857x_I2C_GPIO_expanders = "1"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20180709/a3b6e722/attachment.html>