[yocto] [meta-rockchip][PATCH] README: remove irrelevant information

[Romain Perier]

Hello,

Even if I agree with the reason of why you want to remove this section. I
think , it might be a good point to keep a note about this in the README.
Just explain that this is not up to the bsp layer to do this, but to the
distro (a short sentence).

What do you think ?
Romain


2017-04-30 4:23 GMT+02:00 Trevor Woerner <twoerner at gmail.com>:

> As of openembedded-core commit 2b3ae58f5eaecc8474761c543ff5347aa0e3c4c8
> hardfp
> is enabled by default.
>
> Signed-off-by: Trevor Woerner <twoerner at gmail.com>
> ---
>  README | 16 ----------------
>  1 file changed, 16 deletions(-)
>
> diff --git a/README b/README
> index b2e89f3..7f4a499 100644
> --- a/README
> +++ b/README
> @@ -49,7 +49,6 @@ Table of Contents
>    I. Configure yocto/oe environment
>   II. Building a second level bootloader based on kexec
>  III. Booting your device
> - IV. Performance
>
>  I. Configure yocto/oe environment
>  ========================================
> @@ -127,18 +126,3 @@ linux-next from tftp='tftp://192.168.0.5/zImage
> dtb=tftp://192.168.0.5/<MACHINE>
>  Then, plug your SDCARD into your Rockchip device and power on the board.
> If
>  everything worked fine, Petitboot should be started automatically and
> list all
>  entries found in the configuration file.
> -
> -IV. Performance
> -===============
> -
> -By default a BSP layer should not be tuning a build, this is a
> DISTRO-level
> -decision. As such the default machine settings are meant to be the lowest
> -common denominator in order to maximize generality. If you are interested
> in
> -tweaking your build to maximize performance you can either use a DISTRO
> that
> -has these same goals, or you can add settings in your configuration files
> -(e.g. local.conf) as follows:
> -
> -       for rk3288:
> -               DEFAULTTUNE = "cortexa17hf-neon-vfpv4"
> -       for rk3066:
> -               DEFAULTTUNE = "cortexa9-neon"
> --
> 2.12.0.rc1.48.g076c053
>
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20170506/8c2bc2ba/attachment.html>