[yocto] [meta-raspberrypi][PATCH v2 00/13] Support for VC4 graphics driver
piotr.lewicki
piotr.lewicki at elfin.de
Tue May 24 05:27:19 PDT 2016
So I understand that 1 and 2 should be applied and 3rd is already merged
into master (of poky).
I cannot wait to for your fixes for gst-omx and later omxplayer.
Thanks,
Piotr
On 24.05.2016 14:06, Herve Jourdain wrote:
> Hi Piotr,
>
> Please make sure you have the latest series, the 02 was modified actually,
> and is different from what you have.
> If meta-raspberrypi was changed since I sent the patch, then there might be
> some need to rebase it. Dear list, do you need me to send a v3 taking into
> account the latest modifications of the meta-raspberrypi master, if any?
> The other patch threads, that are needed, are:
> 1. [yocto][meta-raspberrypi][PATCH v3 0/5] Support for .dtbo files for dtb
> overlays, required by kernels 4.4.6+
> 2. [yocto][PATCH v2 0/1] Support for .dtbo files for dtb overlays
> 3. [OE-core][mesa][PATCH v2 0/1] Fix mesa_populate_packages() when dri is
> disabled [I believe Ross Burton has modified the original one to use
> oe.path.join() when committing it]
>
> To be more specific, I will most likely start by fixing gst-omx (which
> currently wants to use userland on RPI), then go for omxplayer.
>
> Herve
>
> -----Original Message-----
> From: piotr.lewicki [mailto:piotr.lewicki at elfin.de]
> Sent: mardi 24 mai 2016 13:08
> To: Herve Jourdain <herve.jourdain at neuf.fr>; yocto at yoctoproject.org
> Subject: Re: [yocto] [meta-raspberrypi][PATCH v2 00/13] Support for VC4
> graphics driver
>
> On 24.05.2016 12:42, Herve Jourdain wrote:
>> Hi Piotr,
> Hi,
> There were issues with patches 02, 07 and 12.
> 02- due to different overlay naming (overlays/vc4-kms-v3d-overlay.dtb
> instead of overlays/vc4-kms-v3d.dtbo) and 07 and 12 due to bump of
> linux-raspberrypi from 4.4.8 to 4.4.9 (on master).
>> I know that the omxplayer would not build at this time, because VC4
>> and userland will conflict, and currently omxplayer depends on userland.
>> I will check if it can be supported with VC4 driver enabled, but for
>> the moment it's true I disabled it in my build.
>>
>> Regarding your patches:
>> 1. Are you using linux kernel 4.4? You should set
>> PREFERRED_VERSION_linux-raspberrypi = "4.4.%" somewhere, either in
>> your distro configuration file, or your local.conf.
>> If you do so, it should get kernel 4.4.10, which requires .dtbo
>> files for overlay. As mentioned in the patch, support for VC4 in 4.1
>> is not stable, and therefore not supported.
> I did that :-)
>> 2. I've seen only one TODO, did you make only one modification?
> There were issues with patches 02, 07 and 12.
> 02- due to different overlay naming (overlays/vc4-kms-v3d-overlay.dtb
> instead of overlays/vc4-kms-v3d.dtbo) and 07 and 12 due to bump of
> linux-raspberrypi from 4.4.8 to 4.4.9 (on master).
>
> Now I see that 02 whas not necessary- I just missed the patch you provided
> earlier.
>> 3. There are other patches that are needed to be applied, before this
>> patch series is applied: 2 for .dtbo support (1 in meta-raspberrypi, 1
>> in meta), 1 for mesa (to allow packaging with empty DRI).
> Ok. I didn't know. Can you confirm that I have the right patches?
> Patch for meta is from thread "[yocto] [PATCH v2 0/1] Support for .dtbo
> files for dtb overlays"?
> Patch for meta-raspberrypi is "[yocto] [meta-raspberrypi][PATCH 0/8] Support
> for vc4 graphics driver"?
> Patch for mesa is part of those patches above?
>> I'll take a look at the omxplayer issue as soon as I can, in the
>> meanwhile I recommend to not use it...
> This would be great. Thank you.
>> Herve
>>
>> -----Original Message-----
>> From: piotr.lewicki [mailto:piotr.lewicki at elfin.de]
>> Sent: mardi 24 mai 2016 11:59
>> To: Herve Jourdain <herve.jourdain at neuf.fr>; yocto at yoctoproject.org
>> Subject: Re: [yocto] [meta-raspberrypi][PATCH v2 00/13] Support for
>> VC4 graphics driver
>>
>> I have tried these patches, but there were some hunks and errors
>> during applying to current master revision
>> (69840c0bbe03c2e61601e2377c8e2adc264e0478).
>> Building 'rpi-hwup-image' passed, but while building 'rpi-test-image'
>> (omxplayer recipe) I have noticed some errors due to missing files:
>> - IL/OMX_Core.h
>> - VG/openvg.h
>> - bcm_host.h
>>
>> I'm attaching omxplayer_build_errors.txt with build log and my patch
>> with changes created by Herve (adapted to current master revision) -
>> Support_for_VC4_graphics_driver.patch (Herve- if you decide to use
>> that and resend v3 of patches - please remove my TODO from
>> "conf/machine/include/rpi-base.inc"
>>
>> Could you take a look at that and help me resolve those issues?
>>
>>
>> I currently have a problem that I'm forced to use Raspbian because
>> playing FHD/1080p videos with omxplayer from Yocto runs choppy (I'm
>> not sure if that's the right word, but playback is not smooth) while
>> with Raspbian it works perfect.
>> Do you think that enabling VC4 graphics driver can solve my issue?
>> Did any of you experienced similar problems? Do you have some other
>> solution or do you know what's the cause of this?
>>
>>
>> Thanks,
>> Piotr Lewicki
>>
>>
>> On 20.05.2016 13:51, Herve Jourdain wrote:
>>> This v2 series addresses the following issues with the first series:
>>> a. Fix the 4.4.10 kernel revision
>>> b. Effectively add vc4-kms-v3d overlay to the list of overlays to
>>> build (forgotten previously) c. Make the parameter to the v4c-kms-v3d
>>> overlay configurable d. Add default values for the cma parameter to
>>> the v4c-kms-v3d overlay, depending on the board (and the memory it
>>> has)
>>>
>>> This patch series enables the support for the VC4 graphics driver
>>> from
>> Eric Anholt.
>>> There was a previous patch series by Javier Martinez Canillas, but it
>> required use of a different kernel.
>>> VC4 is now supported in the raspberrypi official kernel, at least for
>> 4.4.9+.
>>> The support in 4.1 exists, but it is NOT STABLE, so it has been
>>> deemed
>> unreasonable to support VC4 with 4.1 kernels.
>>> THEREFORE, VC4 graphics is supported ONLY for kernel versions 4.4.9
>>> and
>> later.
>>> This patch series proposes to support VC4 by only adding
>>> 'vc4graphics' to
>> MACHINE_FEATURES, for raspberrypi. If this is set, it will trigger all
>> the necessary configuration/changes to use the VC4 driver, including
>> mesa/wayland/weston currently, and adding the overlay required.
>>> In order for this series to work, some previous patches are needed
>> (support for .dtbo, and fix of the mesa packaging when there is no DRI
>> driver).
>>> The memory reserved for the VC4 driver has default values depending
>>> on the
>> version of the board used, but it can be configured by setting
>> VC4_CMA_SIZE to a value supported by the overlay ('cma-256',
>> 'cma-192', 'cma-128', 'cma-96', 'cma-64').
>>> 'cma-256' is the recommended value, but it might not be possible on
>>> boards
>> with 512MB or DRAM, or less...
>>> 'cma-64' is known to not being able to support FHD/1080p.
>>>
>>> It was tested with wayland/weston, without the support for X11.
>>>
>>> This patch series depends on two other patch series previously
>>> posted,
>> that enable the support for .dtbo overlay files.
>>> Herve Jourdain (13):
>>> rpi-default-providers.inc: change default providers to support
>>> vc4graphics
>>> rpi-base.inc: add vc4-kms-v3d to the overlays to support vc4graphics
>>> raspberrypi.conf: set the default value of VC4_CMA_SIZE to support
>>> vc4graphics
>>> raspberrypi0.conf: set the default value of VC4_CMA_SIZE to support
>>> vc4graphics
>>> raspberrypi2.conf: set the default value of VC4_CMA_SIZE to support
>>> vc4graphics
>>> raspberrypi3.conf: set the default value of VC4_CMA_SIZE to support
>>> vc4graphics
>>> firmware.inc: bump version to support vc4graphics
>>> rpi-config_git.bb: add v4c overlay to config.txt to support
>>> vc4graphics
>>> wayland/weston_%.bbappend: modify configuration options to support
>>> vc4graphics
>>> weston/weston_%.bbappend: modify configuration options to support
>>> vc4graphics
>>> mesa_%.bbappend: new file to add the correct configuration options to
>>> support vc4graphics
>>> linux-raspberrypi_4.4.bb: bump the kernel revision to 4.4.10 to
>>> support vc4graphics
>>> linux-rpi.inc: add the configuration options required to support
>>> vc4graphics
>>>
>>> conf/machine/include/rpi-base.inc | 1 +
>>> conf/machine/include/rpi-default-providers.inc | 8 ++++----
>>> conf/machine/raspberrypi.conf | 2 ++
>>> conf/machine/raspberrypi0.conf | 2 ++
>>> conf/machine/raspberrypi2.conf | 2 ++
>>> conf/machine/raspberrypi3.conf | 2 ++
>>> recipes-bsp/bootfiles/rpi-config_git.bb | 10 +++++++++-
>>> recipes-bsp/common/firmware.inc | 4 ++--
>>> recipes-graphics/mesa/mesa_%.bbappend | 4 ++++
>>> recipes-graphics/wayland/weston_%.bbappend | 6 ++----
>>> recipes-graphics/weston/weston_%.bbappend | 13 +++++++------
>>> recipes-kernel/linux/linux-raspberrypi_4.4.bb | 4 ++--
>>> recipes-kernel/linux/linux-rpi.inc | 10 ++++++++++
>>> 13 files changed, 49 insertions(+), 19 deletions(-)
>>> create mode 100644 recipes-graphics/mesa/mesa_%.bbappend
>>>
> Thanks,
> Piotr Lewicki
>
More information about the yocto
mailing list