[yocto] [meta-raspberrypi][PATCH v2 00/13] Support for VC4 graphics driver
Herve Jourdain
herve.jourdain at neuf.fr
Tue May 24 05:06:09 PDT 2016
Hi Piotr,
Please make sure you have the latest series, the 02 was modified actually,
and is different from what you have.
If meta-raspberrypi was changed since I sent the patch, then there might be
some need to rebase it. Dear list, do you need me to send a v3 taking into
account the latest modifications of the meta-raspberrypi master, if any?
The other patch threads, that are needed, are:
1. [yocto][meta-raspberrypi][PATCH v3 0/5] Support for .dtbo files for dtb
overlays, required by kernels 4.4.6+
2. [yocto][PATCH v2 0/1] Support for .dtbo files for dtb overlays
3. [OE-core][mesa][PATCH v2 0/1] Fix mesa_populate_packages() when dri is
disabled [I believe Ross Burton has modified the original one to use
oe.path.join() when committing it]
To be more specific, I will most likely start by fixing gst-omx (which
currently wants to use userland on RPI), then go for omxplayer.
Herve
-----Original Message-----
From: piotr.lewicki [mailto:piotr.lewicki at elfin.de]
Sent: mardi 24 mai 2016 13:08
To: Herve Jourdain <herve.jourdain at neuf.fr>; yocto at yoctoproject.org
Subject: Re: [yocto] [meta-raspberrypi][PATCH v2 00/13] Support for VC4
graphics driver
On 24.05.2016 12:42, Herve Jourdain wrote:
> Hi Piotr,
Hi,
There were issues with patches 02, 07 and 12.
02- due to different overlay naming (overlays/vc4-kms-v3d-overlay.dtb
instead of overlays/vc4-kms-v3d.dtbo) and 07 and 12 due to bump of
linux-raspberrypi from 4.4.8 to 4.4.9 (on master).
> I know that the omxplayer would not build at this time, because VC4
> and userland will conflict, and currently omxplayer depends on userland.
> I will check if it can be supported with VC4 driver enabled, but for
> the moment it's true I disabled it in my build.
>
> Regarding your patches:
> 1. Are you using linux kernel 4.4? You should set
> PREFERRED_VERSION_linux-raspberrypi = "4.4.%" somewhere, either in
> your distro configuration file, or your local.conf.
> If you do so, it should get kernel 4.4.10, which requires .dtbo
> files for overlay. As mentioned in the patch, support for VC4 in 4.1
> is not stable, and therefore not supported.
I did that :-)
> 2. I've seen only one TODO, did you make only one modification?
There were issues with patches 02, 07 and 12.
02- due to different overlay naming (overlays/vc4-kms-v3d-overlay.dtb
instead of overlays/vc4-kms-v3d.dtbo) and 07 and 12 due to bump of
linux-raspberrypi from 4.4.8 to 4.4.9 (on master).
Now I see that 02 whas not necessary- I just missed the patch you provided
earlier.
> 3. There are other patches that are needed to be applied, before this
> patch series is applied: 2 for .dtbo support (1 in meta-raspberrypi, 1
> in meta), 1 for mesa (to allow packaging with empty DRI).
Ok. I didn't know. Can you confirm that I have the right patches?
Patch for meta is from thread "[yocto] [PATCH v2 0/1] Support for .dtbo
files for dtb overlays"?
Patch for meta-raspberrypi is "[yocto] [meta-raspberrypi][PATCH 0/8] Support
for vc4 graphics driver"?
Patch for mesa is part of those patches above?
> I'll take a look at the omxplayer issue as soon as I can, in the
> meanwhile I recommend to not use it...
This would be great. Thank you.
>
> Herve
>
> -----Original Message-----
> From: piotr.lewicki [mailto:piotr.lewicki at elfin.de]
> Sent: mardi 24 mai 2016 11:59
> To: Herve Jourdain <herve.jourdain at neuf.fr>; yocto at yoctoproject.org
> Subject: Re: [yocto] [meta-raspberrypi][PATCH v2 00/13] Support for
> VC4 graphics driver
>
> I have tried these patches, but there were some hunks and errors
> during applying to current master revision
> (69840c0bbe03c2e61601e2377c8e2adc264e0478).
> Building 'rpi-hwup-image' passed, but while building 'rpi-test-image'
> (omxplayer recipe) I have noticed some errors due to missing files:
> - IL/OMX_Core.h
> - VG/openvg.h
> - bcm_host.h
>
> I'm attaching omxplayer_build_errors.txt with build log and my patch
> with changes created by Herve (adapted to current master revision) -
> Support_for_VC4_graphics_driver.patch (Herve- if you decide to use
> that and resend v3 of patches - please remove my TODO from
> "conf/machine/include/rpi-base.inc"
>
> Could you take a look at that and help me resolve those issues?
>
>
> I currently have a problem that I'm forced to use Raspbian because
> playing FHD/1080p videos with omxplayer from Yocto runs choppy (I'm
> not sure if that's the right word, but playback is not smooth) while
> with Raspbian it works perfect.
> Do you think that enabling VC4 graphics driver can solve my issue?
> Did any of you experienced similar problems? Do you have some other
> solution or do you know what's the cause of this?
>
>
> Thanks,
> Piotr Lewicki
>
>
> On 20.05.2016 13:51, Herve Jourdain wrote:
>> This v2 series addresses the following issues with the first series:
>> a. Fix the 4.4.10 kernel revision
>> b. Effectively add vc4-kms-v3d overlay to the list of overlays to
>> build (forgotten previously) c. Make the parameter to the v4c-kms-v3d
>> overlay configurable d. Add default values for the cma parameter to
>> the v4c-kms-v3d overlay, depending on the board (and the memory it
>> has)
>>
>> This patch series enables the support for the VC4 graphics driver
>> from
> Eric Anholt.
>> There was a previous patch series by Javier Martinez Canillas, but it
> required use of a different kernel.
>> VC4 is now supported in the raspberrypi official kernel, at least for
> 4.4.9+.
>> The support in 4.1 exists, but it is NOT STABLE, so it has been
>> deemed
> unreasonable to support VC4 with 4.1 kernels.
>> THEREFORE, VC4 graphics is supported ONLY for kernel versions 4.4.9
>> and
> later.
>> This patch series proposes to support VC4 by only adding
>> 'vc4graphics' to
> MACHINE_FEATURES, for raspberrypi. If this is set, it will trigger all
> the necessary configuration/changes to use the VC4 driver, including
> mesa/wayland/weston currently, and adding the overlay required.
>> In order for this series to work, some previous patches are needed
> (support for .dtbo, and fix of the mesa packaging when there is no DRI
> driver).
>> The memory reserved for the VC4 driver has default values depending
>> on the
> version of the board used, but it can be configured by setting
> VC4_CMA_SIZE to a value supported by the overlay ('cma-256',
> 'cma-192', 'cma-128', 'cma-96', 'cma-64').
>> 'cma-256' is the recommended value, but it might not be possible on
>> boards
> with 512MB or DRAM, or less...
>> 'cma-64' is known to not being able to support FHD/1080p.
>>
>> It was tested with wayland/weston, without the support for X11.
>>
>> This patch series depends on two other patch series previously
>> posted,
> that enable the support for .dtbo overlay files.
>> Herve Jourdain (13):
>> rpi-default-providers.inc: change default providers to support
>> vc4graphics
>> rpi-base.inc: add vc4-kms-v3d to the overlays to support vc4graphics
>> raspberrypi.conf: set the default value of VC4_CMA_SIZE to support
>> vc4graphics
>> raspberrypi0.conf: set the default value of VC4_CMA_SIZE to support
>> vc4graphics
>> raspberrypi2.conf: set the default value of VC4_CMA_SIZE to support
>> vc4graphics
>> raspberrypi3.conf: set the default value of VC4_CMA_SIZE to support
>> vc4graphics
>> firmware.inc: bump version to support vc4graphics
>> rpi-config_git.bb: add v4c overlay to config.txt to support
>> vc4graphics
>> wayland/weston_%.bbappend: modify configuration options to support
>> vc4graphics
>> weston/weston_%.bbappend: modify configuration options to support
>> vc4graphics
>> mesa_%.bbappend: new file to add the correct configuration options to
>> support vc4graphics
>> linux-raspberrypi_4.4.bb: bump the kernel revision to 4.4.10 to
>> support vc4graphics
>> linux-rpi.inc: add the configuration options required to support
>> vc4graphics
>>
>> conf/machine/include/rpi-base.inc | 1 +
>> conf/machine/include/rpi-default-providers.inc | 8 ++++----
>> conf/machine/raspberrypi.conf | 2 ++
>> conf/machine/raspberrypi0.conf | 2 ++
>> conf/machine/raspberrypi2.conf | 2 ++
>> conf/machine/raspberrypi3.conf | 2 ++
>> recipes-bsp/bootfiles/rpi-config_git.bb | 10 +++++++++-
>> recipes-bsp/common/firmware.inc | 4 ++--
>> recipes-graphics/mesa/mesa_%.bbappend | 4 ++++
>> recipes-graphics/wayland/weston_%.bbappend | 6 ++----
>> recipes-graphics/weston/weston_%.bbappend | 13 +++++++------
>> recipes-kernel/linux/linux-raspberrypi_4.4.bb | 4 ++--
>> recipes-kernel/linux/linux-rpi.inc | 10 ++++++++++
>> 13 files changed, 49 insertions(+), 19 deletions(-)
>> create mode 100644 recipes-graphics/mesa/mesa_%.bbappend
>>
>
Thanks,
Piotr Lewicki
More information about the yocto
mailing list