[yocto] [meta-raspberry] Raspberry Pi 3

[Trevor Woerner]

On Fri 2016-04-01 @ 03:55:31 PM, Khem Raj wrote:
> 
> > On Apr 1, 2016, at 3:46 PM, Trevor Woerner <twoerner at gmail.com> wrote:
> > 
> > On Fri 2016-04-01 @ 03:17:29 PM, Trevor Woerner wrote:
> >> As far as I can tell there are two raspberry pi OE layers which include this
> >> commit:
> >> 
> >> 1. git://git.yoctoproject.org/meta-raspberrypi::master
> >> 2. https://github.com/kraj/meta-raspberrypi.git::kraj/master
> > [...]
> >> - Using 1 (the official layer from Andrei) I get an image that boots but the
> >>   console remains messed up (as before).
> >> 
> >> - Using 2 (the layer from Khem) I get an image that flashes the rainbow
> >>   pattern on the HDMI monitor, shows the 4 berries, then stops. Nothing else
> >>   happens, no messages on the console.
> > 
> > I get the same results with no local.conf tweaks and building the
> > rpi-basic-image.
> > 
> > Does anyone have a run-tested, OE-built, raspi3 image with working console?
> > 
> 
> can you select 4.1 for kernel and try with master, Andre has merged all my changes
> today

Yes, that's one of the options I have already tried; it boots but the console
is still garbled.

The 4.1 kernel is the default in Andrei's layer. Using the 4.4 kernel from
your layer I can't get past the 4 raspberries.