[yocto] BeagleBone...bitbake -v core-image-sato stops

[Khem Raj]

> On Dec 28, 2015, at 8:56 AM, kaffeesurrogat <kaffeesurrogat at posteo.de> wrote:
> 
> Hello again,
> 
> well I'm really a noob and guessing what to do. Well I've interrupted bitbake cause
> nothing was happing and the log.do_compile of attr-native didn't show any error message. I've started it all over again an now I do get an error message: yes ;-)
> 
> it says:
> 
> gmake[2]: ../-libtool: Command not found
> 
> This looks a little bit weird to me, especially the "minus" in front of the "libtool" .....
> 
> Where does it come from? A missing or empty variable? Something like ${MYNAMEIS}-libtool an ${MYNAMEIS} not known?
> 

what is your build host ?.
I would suggest to setup a clean build system ( may be a VM ) and try it out on that

> Greetings,
> 
> Kaffeesurrogat
> 
> 
> On 28.12.2015 10:58, kaffeesurrogat wrote:
>> Sorry for sending the same mail twice. I've mixed up my identities.
>> 
>> 
>> On 28.12.2015 09:58, kaffeesurrogat at posteo.de wrote:
>>> Sorry guys .....
>>> 
>>> I thought I was done. Actually I'm not a bit smarter then before ;-)
>>> 
>>> I'm still trying to build a yocto-image for a beaglebone. I believed, that the reason why yocto stopped compiling at attr-native-2.4.47-r0 was the missing gcc-multilib support. I've tried the same build on a gentoo machine at work, which had a multilib environment, and it finished.
>>> 
>>> I've setup a new gentoo with multilib environment on my laptop but ...... bitbake stops again at attr-native. So this was not the trick. The  log.do_compile in
>>> 
>>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp
>>> 
>>> says nothing special, at least for me.  Here is the quote:
>>> 
>>> -----------------------------------------------------------------------------------------------------
>>> 
>>> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-O1 -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]: Leaving directory '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr'
>>> 
>>> o fr.mo fr.po
>>> 
>>> -------------------------------------------------------------------------------------------------------
>> 
>> 
>> ADD-ON:
>> 
>> I've had a look in the log.do-compile-file on my machine at work. It
>> says .....
>> 
>> -----------------------------------------------------------------------------------------------------------
>> 
>> o fr.mo fr.po
>> gmake[3]: Nothing to be done for 'default'.
>> gmake[3]: Leaving directory
>> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1'
>> /usr/bin/gmake -C man2
>> gmake[2]: o: Command not found
>> ../include/buildrules:66: recipe for target 'fr.mo' failed
>> gmake[2]: [fr.mo] Error 127 (ignored)
>> 
>> -----------------------------------------------------------------------------------------------------------
>> 
>> Well ..... ????????????????
>> 
>>> 
>>> It will stay at this point forever.
>>> 
>>> 
>>> The last output messages of bitbake:
>>> 
>>> 
>>> --------------------------------------------------------------------------------------------------------
>>> 
>>> + rm -rf /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/
>>> 
>>> + ret=0
>>> + trap '' 0
>>> + exit 0
>>> 
>>> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created.
>>> [INFO] processing of raw cfg data completed.
>>> 
>>> 
>>> ********************************************************************************
>>>  Configuration stored in /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config
>>> ********************************************************************************
>>> 
>>>  To build with this kernel configuration, ensure a suitable toolchain
>>>  is in your path for arm, note its common command prefix, and do:
>>> 
>>>   make O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build ARCH=arm \
>>>        CROSS_COMPILE=<cross-compile-prefix>
>>> 
>>> 
>>> + '[' 0 -ne 0 ']'
>>> 
>>> + echo '# Global settings from linux recipe'
>>> + echo 'CONFIG_LOCALVERSION="-yocto-standard"'
>>> + ret=0
>>> + trap '' 0
>>> + exit 0
>>> 
>>> Currently 1 running tasks (1040 of 1770):
>>> 0: attr-native-2.4.47-r0 do_compile (pid 1778)
>>> 
>>> -------------------------------------------------------------------------------------------------
>>> 
>>> To be honest, I'm lost ....
>>> 
>>> Would be happy about some help,
>>> 
>>> kaffeesurrogat
>>> 
>>> 
>>> On 07.12.2015 21:16, kaffeesurrogat at posteo.de wrote:
>>>> cd /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi
>>> 
>> 
> 
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 204 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20151228/4132eec5/attachment.pgp>