[yocto] BeagleBone...bitbake -v core-image-sato stops
kaffeesurrogat
kaffeesurrogat at posteo.de
Mon Dec 28 08:56:06 PST 2015
Hello again,
well I'm really a noob and guessing what to do. Well I've interrupted
bitbake cause
nothing was happing and the log.do_compile of attr-native didn't show
any error message. I've started it all over again an now I do get an
error message: yes ;-)
it says:
gmake[2]: ../-libtool: Command not found
This looks a little bit weird to me, especially the "minus" in front of
the "libtool" .....
Where does it come from? A missing or empty variable? Something like
${MYNAMEIS}-libtool an ${MYNAMEIS} not known?
Greetings,
Kaffeesurrogat
On 28.12.2015 10:58, kaffeesurrogat wrote:
> Sorry for sending the same mail twice. I've mixed up my identities.
>
>
> On 28.12.2015 09:58, kaffeesurrogat at posteo.de wrote:
>> Sorry guys .....
>>
>> I thought I was done. Actually I'm not a bit smarter then before ;-)
>>
>> I'm still trying to build a yocto-image for a beaglebone. I believed,
>> that the reason why yocto stopped compiling at attr-native-2.4.47-r0
>> was the missing gcc-multilib support. I've tried the same build on a
>> gentoo machine at work, which had a multilib environment, and it
>> finished.
>>
>> I've setup a new gentoo with multilib environment on my laptop but
>> ...... bitbake stops again at attr-native. So this was not the trick.
>> The log.do_compile in
>>
>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp
>>
>>
>> says nothing special, at least for me. Here is the quote:
>>
>> -----------------------------------------------------------------------------------------------------
>>
>>
>> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath-link
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
>> -Wl,-rpath
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
>> -Wl,-O1 -Wl,-rpath-link
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath-link
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
>> -Wl,-rpath
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
>> -Wl,-O1 -Wl,-rpath-link
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath-link
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
>> -Wl,-rpath
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
>> -Wl,-rpath
>> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]:
>> Leaving directory
>> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr'
>>
>> o fr.mo fr.po
>>
>> -------------------------------------------------------------------------------------------------------
>>
>
>
> ADD-ON:
>
> I've had a look in the log.do-compile-file on my machine at work. It
> says .....
>
> -----------------------------------------------------------------------------------------------------------
>
>
> o fr.mo fr.po
> gmake[3]: Nothing to be done for 'default'.
> gmake[3]: Leaving directory
> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1'
>
> /usr/bin/gmake -C man2
> gmake[2]: o: Command not found
> ../include/buildrules:66: recipe for target 'fr.mo' failed
> gmake[2]: [fr.mo] Error 127 (ignored)
>
> -----------------------------------------------------------------------------------------------------------
>
>
> Well ..... ????????????????
>
>>
>> It will stay at this point forever.
>>
>>
>> The last output messages of bitbake:
>>
>>
>> --------------------------------------------------------------------------------------------------------
>>
>>
>> + rm -rf
>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/
>>
>> + ret=0
>> + trap '' 0
>> + exit 0
>>
>> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created.
>> [INFO] processing of raw cfg data completed.
>>
>>
>> ********************************************************************************
>>
>> Configuration stored in
>> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config
>> ********************************************************************************
>>
>>
>> To build with this kernel configuration, ensure a suitable toolchain
>> is in your path for arm, note its common command prefix, and do:
>>
>> make
>> O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build
>> ARCH=arm \
>> CROSS_COMPILE=<cross-compile-prefix>
>>
>>
>> + '[' 0 -ne 0 ']'
>>
>> + echo '# Global settings from linux recipe'
>> + echo 'CONFIG_LOCALVERSION="-yocto-standard"'
>> + ret=0
>> + trap '' 0
>> + exit 0
>>
>> Currently 1 running tasks (1040 of 1770):
>> 0: attr-native-2.4.47-r0 do_compile (pid 1778)
>>
>> -------------------------------------------------------------------------------------------------
>>
>>
>> To be honest, I'm lost ....
>>
>> Would be happy about some help,
>>
>> kaffeesurrogat
>>
>>
>> On 07.12.2015 21:16, kaffeesurrogat at posteo.de wrote:
>>> cd
>>> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi
>>
>
More information about the yocto
mailing list