[yocto] Yocto Eclipse Plugin

[Minchev, Todor]

Hello Abhinav,

On Wed, 2015-04-15 at 10:15 +0000, Bipnesh, Abhinav (Abhinav) wrote:
> Hi Todor,
> 
> I tried with below link and still observe the same issue. It didn’t identify the bitbake directory environment files and report same errors.

In your previous email you mentioned that the cross compiler variables
are populated for the hello world example. If that's the case the IDE
must have parsed the environment setup file.

Please open a bug here so we can track this issue and I will investigate
the problem. 
 
https://bugzilla.yoctoproject.org/enter_bug.cgi?product=Eclipse%20Plugin

Thanks,
Todor

> 
> Thanks,
> Abhinav
> 
> -----Original Message-----
> From: Minchev, Todor [mailto:todor.minchev at intel.com] 
> Sent: Tuesday, April 14, 2015 17:20
> To: Bipnesh, Abhinav (Abhinav)
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] Yocto Eclipse Plugin
> 
> Hello Abinhav,
> 
> This is most likely caused by a mismatch between the plugin build (juno)
> and the IDE (luna). Please install the luna build of the plugin from
> here:
> 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__autobuilder.yoctoproject.org_pub_nightly_CURRENT_eclipse-2Dplugin_luna_org.yocto.sdk-2Ddevelopment-2D201504140001-2Darchive.zip&d=AwIFaQ&c=BFpWQw8bsuKpl1SgiZH64Q&r=geJ1wB7xRIMmteYB2Fo8esL32BOWvwP1HmY0YuLEB4E&m=xo2lJGQ9ANMp6iXK5QeTFxfGaBn9HAZBpwjlrurzJSg&s=6lW-2yvLIg91mRJrVqXU608Eon92Q0K2p5jUJSptFFI&e= 
> 
> Thanks,
> Todor
> 
> On Tue, 2015-04-14 at 08:39 +0000, Bipnesh, Abhinav (Abhinav) wrote:
> > Hi,
> > 
> >  
> > 
> > I was using the same URL as you suggested for the Yocto Eclipse
> > Plugin. Below is the snapshot of the error I am getting when I try to
> > configure it as Build System derived tool chain
> > 
> >  
> 
> > 
> > 
> > 
> >  
> > 
> >  
> > 
> > I already did build meta-ide-support and can see the
> > environment-setup-ppce5500-fsl-linux under <build directory>/tmp. If I
> > select Standalone SDK the it starts work without any issue.
> > 
> >  
> > 
> >  
> > 
> > Second issue I am facing is that when I import my existing project
> > which is a Makefile base I can see option for Yocto CMake Build
> > (Toolchain) as below
> > 
> >  
> > 
> > 
> > 
> >  
> > 
> > So how to fix this as need to make it working with existing Makefile
> > based project.
> > 
> >  
> > 
> >  
> > 
> > Any thoughts how to fix these issues.
> > 
> >  
> > 
> > Thanks,
> > 
> > Abhinav
> > 
> >  
> > 
> > -----Original Message-----
> > From: Minchev, Todor [mailto:todor.minchev at intel.com] 
> > Sent: Tuesday, April 14, 2015 12:38
> > To: Bipnesh, Abhinav (Abhinav)
> > Cc: yocto at yoctoproject.org
> > Subject: Re: [yocto] Yocto Eclipse Plugin
> > 
> >  
> > 
> > Hello Abhinav,
> > 
> >  
> > 
> > On Mon, 2015-04-13 at 18:27 +0000, Bipnesh, Abhinav (Abhinav) wrote:
> > 
> > > Hi All,
> > 
> > > 
> > 
> > > I am trying to setup the Yocto Eclipse Plugin for Eclipse (Luna
> > release). I am able to install the Juno release plugin for 1.7.1
> > release. But while configuring it I am facing issues as below
> > 
> >  
> > 
> > > 1. When I try to provide BitBake directory as part of tool chain I
> > get an error that need to build meta-ide-support before configuring
> > it. 
> > 
> > > As I did build meta-ide-support before setting up the path as I can
> > see an environment file present under <bitbake machine directory>/tmp
> > path.
> > 
> >  
> > 
> > You will need to provide the path to the build directory. This is the
> > 
> > directory holding tmp.
> > 
> >  
> > 
> > > 2. If I select Standard SDK option then it accepts the same i.e. it
> > accept environment file present under tmp directory as vaild which I
> > suppose it should not do.
> > 
> > > 3. I already has Makefile based project which I am trying to
> > configure in eclipse by selecting Yocto as Toolchain. 
> > 
> > > But when I try to build it I am seeing its using platform GCC
> > instead of Yocto tool chain.
> > 
> >  
> > 
> > Selecting the correct directory should set up the cross-compiler
> > 
> > environment and fix this.
> > 
> > >  
> > 
> > > How to fix the same as I cant change this project to an CMake based
> > project.
> > 
> > > 
> > 
> > > Is there as way I can use Kepler plugin instead of Juno as when I
> > try the same with Luna I am getting dependencies errors.
> > 
> >  
> > 
> > You can find the plugin releases here:
> > 
> > https://urldefense.proofpoint.com/v2/url?u=http-3A__downloads.yoctoproject.org_releases_eclipse-2Dplugin_&d=AwIFaQ&c=BFpWQw8bsuKpl1SgiZH64Q&r=geJ1wB7xRIMmteYB2Fo8esL32BOWvwP1HmY0YuLEB4E&m=Hg_RatI-pPFNhlwlj3rvSiP3RspGPYNzHRBg-XaXN1U&s=11DZqLCED8UtaM9vU0YxGMeaNWGlerPzTawEoVwuJd4&e= 
> > 
> >  
> > 
> > Cheers,
> > 
> > Todor
> > 
> >  
> > 
> > 
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 5229 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150415/e5c86b1d/attachment.bin>