[yocto] yocto 1.6 - beaglebone black - cape manager

[Diego Sueiro]

TakTak,

On Wed, Sep 10, 2014 at 1:39 PM, TakkTakk <tomek82221 at gazeta.pl> wrote:

> yocto buit with INSANE_SKIP_${PN} += "installed-vs-shipped" with no error.
> then i copied:
> cp MLO /media/boot/MLO
> cp u-boot-beaglebone.img /media/boot/u-boot.img
> sudo tar -xvf core-image-base-beaglebone.tar.gz -C /media/root/
>
> then, inserted microSD card to Beaglebone Black and bbb not boot. 4
> led lit steadily and nothing happens. I have cable hdmi connected to
> monitor.
>
> then i did
> $ cp uImage /media/boot
> $ mkdir /media/boot/dtbs
> $ cp uImage-am335x-boneblack.dtb /media/boot/dtbs/am335x-boneblack.dtb
>
> $ cp uEnv.txt /media/boot
>
> uEnv.txt from here
> http://www.embarcados.com.br/beaglebone-black-yocto/ but i changed
> zImage to uImage and still I can not boot the SD Card on the Beagle.
> All four LEDs stay lit steadily.
> What am i doing wrong?
>

Do you have another image installed on eMMC? If yes try to power up the
board with sdcard inserted and the switch S2 pressed (near sdcard slot).


Regards,

--
*dS
Diego Sueiro

Administrador do Embarcados
www.embarcados.com.br
<http://www.embarcados.com.br/?utm_source=assinatura_diego&utm_medium=e-mail&utm_campaign=Assinatura%20Email%20Diego>

/*long live rock 'n roll*/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20140911/3c6123cd/attachment.html>