[yocto] yocto 1.6 - beaglebone black - cape manager

[TakkTakk]

Layers :
BBLAYERS ?= " \
  /home/fil/Pulpit/yocto/poky/meta \
  /home/fil/Pulpit/yocto/poky/meta-yocto \
  /home/fil/Pulpit/yocto/poky/meta-beagleboard/common-bsp \
  /home/fil/Pulpit/yocto/poky/meta-openembedded/meta-oe \
  /home/fil/Pulpit/yocto/poky/meta-beagleboard/meta-beagleboard-extras \
  /home/fil/Pulpit/yocto/poky/meta-hello \
  "

I can't open serial console.

2014-09-10 20:33 GMT+02:00 Maciej Borzecki <maciej.borzecki at open-rnd.pl>:
> On 09/10 18:39, TakkTakk wrote:
>> yocto buit with INSANE_SKIP_${PN} += "installed-vs-shipped" with no error.
>> then i copied:
>> cp MLO /media/boot/MLO
>> cp u-boot-beaglebone.img /media/boot/u-boot.img
>> sudo tar -xvf core-image-base-beaglebone.tar.gz -C /media/root/
>>
>> then, inserted microSD card to Beaglebone Black and bbb not boot. 4
>> led lit steadily and nothing happens. I have cable hdmi connected to
>> monitor.
>>
>> then i did
>> $ cp uImage /media/boot
>> $ mkdir /media/boot/dtbs
>> $ cp uImage-am335x-boneblack.dtb /media/boot/dtbs/am335x-boneblack.dtb
>>
>> $ cp uEnv.txt /media/boot
>>
>> uEnv.txt from here
>> http://www.embarcados.com.br/beaglebone-black-yocto/ but i changed
>> zImage to uImage and still I can not boot the SD Card on the Beagle.
>> All four LEDs stay lit steadily.
>> What am i doing wrong?
>
> Can you list the layers enabled in your build and post serial console
> output?
>
> Issues that I've seen so far:
> - SD card layout (even block count of boot partition, try checking
> meta-ti archive for my posts)
> - uboot not restoring partition sizes (but I've only seen it on meta-ti
> master, Peter Bigot posted a patch that fixed the problem, AFAIK the
> patch should already be meta-ti, affected uboot 2014.07)
> - kernel overwriting device tree in mem,
> https://bugzilla.yoctoproject.org/show_bug.cgi?id=6165 but apparently
> it's already fixed in master & 1.6.1
>
>>
>>
>> 2014-09-09 19:28 GMT+02:00 Diego Sueiro <diego.sueiro at gmail.com>:
>> >
>> > On Tue, Sep 9, 2014 at 12:53 PM, tomek82221 Gazeta.pl <tomek82221 at gazeta.pl>
>> > wrote:
>> >>
>> >> ok, but where i can add INSANE_SKIP_${PN} += "installed-vs-shipped"
>> >> in meta-beagleboard/common-bsp/recipes-kernel/linux/linux-mainline_3.8.bb
>> >> ?
>> >> or create
>> >> meta-beagleboard/common-bsp/recipes-kernel/linux/linux-mainline_3.8.bbappend
>> >> ?
>> >>
>> >> thanks for your help
>> >
>> >
>> > Both will work.
>> >
>> >
>> > Regards,
>> >
>> > --
>> > *dS
>> > Diego Sueiro
>> >
>> > Administrador do Embarcados
>> > www.embarcados.com.br
>> >
>> > /*long live rock 'n roll*/
>>
>>
>>
>> --
>> TakTak
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
> --
> Maciej Borzęcki
> Senior Software Developer at Open-RnD Sp. z o.o., Poland
> www.open-rnd.pl
> mobile: +48 889 117 365, fax: +48 42 657 9079
>
>
> Niniejsza wiadomość wraz z załącznikami może
> zawierać chronione prawem lub poufne informacje i została
> wysłana wyłącznie do wiadomości i użytku osób, do których
> została zaadresowana. Jeśli wiadomość została otrzymana
> przypadkowo zabrania się jej kopiowania lub rozsyłania do osób
> trzecich. W takim przypadku uprasza się o natychmiastowe
> zniszczenie wiadomości oraz poinformowanie nadawcy o
> zaistniałej sytuacji za pomocą wiadomości zwrotnej.
> Dziękujemy.
>
> This message, including any attachments hereto,
> may contain privileged or confidential information and is sent
> solely for the attention and use of the intended addressee(s).
> If you are not an intended addressee, you may neither use this
> message nor copy or deliver it to anyone. In such case, you
> should immediately destroy this message and kindly notify the
> sender by reply email. Thank you.



-- 
TakTak