[yocto] Error while trying to setup using ADT installer

[Bipnesh, Abhinav (Abhinav)]

Hi,

I was trying to setup Yocto 1.7 released development environment but while the ADT installer tries to download files it get error as 403 forbidden. Below is the snapshot of the same.
<Snip>
[ADT_INST] Please enter your selections here:
I
Spider mode enabled. Check if remote file exists.
--2014-11-06 16:02:03--  http://adtrepo.yoctoproject.org//1.7
Resolving adtrepo.yoctoproject.org... 140.211.169.59
Connecting to adtrepo.yoctoproject.org|140.211.169.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://adtrepo.yoctoproject.org/1.7/ [following]
Spider mode enabled. Check if remote file exists.
--2014-11-06 16:02:04--  http://adtrepo.yoctoproject.org/1.7/
Connecting to adtrepo.yoctoproject.org|140.211.169.59|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Remote file exists and could contain further links,
but recursion is disabled -- not retrieving.

OPKG is not setup, setting up opkg in local, which is required for installing yocto ADT...

Configure opkg ...

Make opkg ...

Make Install opkg ...

Successfully installed OPKG.

Creating new images downloading folder: ./download_image ...
Downloading file: zImage-qemuarm.bin...
--2014-11-06 16:02:25--  http://adtrepo.yoctoproject.org//1.7/rootfs/qemuarm/zImage-qemuarm.bin
Resolving adtrepo.yoctoproject.org... 140.211.169.59
Connecting to adtrepo.yoctoproject.org|140.211.169.59|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2014-11-06 16:02:27 ERROR 403: Forbidden.

Downloading file: core-image-minimal-qemuarm.tar.bz2...
--2014-11-06 16:02:27--  http://adtrepo.yoctoproject.org//1.7/rootfs/qemuarm/core-image-minimal-qemuarm.tar.bz2
Resolving adtrepo.yoctoproject.org... 140.211.169.59
Connecting to adtrepo.yoctoproject.org|140.211.169.59|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2014-11-06 16:02:28 ERROR 403: Forbidden.
. . .
Downloading file: core-image-sato-sdk-qemux86.tar.bz2...
--2014-11-06 16:02:29--  http://adtrepo.yoctoproject.org//1.7/rootfs/qemux86/core-image-sato-sdk-qemux86.tar.bz2
Resolving adtrepo.yoctoproject.org... 140.211.169.59
Connecting to adtrepo.yoctoproject.org|140.211.169.59|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2014-11-06 16:02:29 ERROR 403: Forbidden.


Start installing selected native ADT for archs: arm x86...
#######################################################################
Please note from this point on installation requires sudo password ...
#######################################################################
[sudo] password for test:
Successfully create directory /opt/poky/1.7//var/lib/opkg.
Updating opkg...
</snip>

I have even tried to open aboye URLs through browser still I get the same error. So any thoughts to fix this issue as I am using adt_installer.tar.bz2  for the same.

Thanks,
Abhinav
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20141106/29908ac8/attachment.html>